ILVE UHCPI366 User Manual
  1. Manuals
  2. Brands
  3. ILVE Manuals
  4. Cooktop
  5. UHCPI366
  6. User manual
ILVE UHCPI366 User Manual

ILVE UHCPI366 User Manual

Hide thumbs

Advertisement

Table of Contents

INDUCTION
COOKTOPS
UHCPI366 - UHCPI486
EN User's manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UHCPI366 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ILVE UHCPI366

Summary of Contents for ILVE UHCPI366

  • Page 1 INDUCTION COOKTOPS UHCPI366 - UHCPI486 EN User’s manual...
  • Page 3 IMPORTANT INSTRUCTION - PLEASE READ AND FOLLOW Keep appliance area clear and free from combustible Keep appliance area clear and free from combustible materials, materials, gasoline and other flammable vapors and liquids. gasoline and other flammable vapors and liquids. Before beginning, please read these instructions completely and carefully.

  • Page 4: Installation Instructions

    INDUCTION APPLIANCE INSTALLATION INSTRUCTIONS Use Proper Pan Size - This appliance is equipped with This appliance shall only be installed by an authorized person. one or more surface units of different size. Select utensil This appliance shall be installed in accordance with the shaving flat bottoms large enough to cover the surface unit manufactures installation instructions, IMPORTANT: this heating element.

  • Page 5: Electrical Connection

    ELECTRICAL CONNECTION The connection of the electrical supply must be done by approved installation contractors in accordance with specific National and Local installation standards in conformity with all safety regulations. The warning signs and rating plates on the appliances must strictly be followed. This unit is manufactured for a polarized, grounded 240 volt 60Hz (2 phases 6 AWG, 1 ground 8 AWG with plug, see Fig.

  • Page 6: Induction Principle

    INSTRUCTIONS FOR USE Cooktop Avoid sudden changes of temperature on the ceramic hob. For example, do not pour cold water onto the hot hob. Before the first use Do not leave the pan handles sticking out as they could be Clean your hob with a damp cloth, and then dry the surface flipped accidentally.

  • Page 7: Key Lock Function

    INSTRUCTIONS FOR USE BRIDGE function for the induction hob: power level to continue cooking within 3 to 5 seconds; if this is not done, the Heat-up function is interrupted. Place the pan in the middle of the two heating zones that will be connected (the two equal-sized zones).

  • Page 8: Cleaning And Maintenance

    INSTRUCTIONS FOR USE CLEANING AND MAINTENANCE Residual heat indication List with common types of soiling and recommendations how to treat them: A maximum time of continuous operation is associated with each cooking area. Type of soiling Treatment This depends on the set power level. If the limit of the duration of operation is reached, the respective area is switched off Slight soiling, no burned Wipe with a moist cloth (scotch), without...
  • Page 9 PROXIMITY TO SIDE CABINET INSTALLATION The cooktop may be installed directly to existing base cabinets. The cooktop CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical surfaces above 36” (91.4 cm) high. There must be a minimum of 8”...

  • Page 10: Wiring Diagram

    WIRING DIAGRAM UHCPI366..., UHCPI486... KEYS Yellow-Green Black Encoder Inductor Interface board (1400 W) (1850 W) (2300 W) (1400 W) (2300 W) (1850 W)
  • Page 12 ILVE S.p.A Via Antoniana, 100 — 35011 — Campodarsego (PD) Italy T. +39 049 9200990 / Email: mail@ilve.com cod. EI33960770000EN 06/2025...

This manual is also suitable for:

Uhcpi486

Table of Contents