Subscribe to Our Youtube Channel
Related Manuals for Amart Furniture LARISA 82522
Summary of Contents for Amart Furniture LARISA 82522
- Page 1 ASSEMBLY INSTRUCTION LARISA TALL CHEST ITEM CODE 82522 Imported by Amart Furniture Pty Ltd.Qld.Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture Customer Service Free call 1800 351 084 82522 1-10...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean,level.spacious assembly area.Avoid hard surfaces that may damage the product 2. Take care when lifting.Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly. 4. -
Page 3: Parts List
PARTS LIST A.Cam lock and Cam pin E.Bolt F.Connector G.Screw 8x30 6x35 M4x20 3.5x12 15X35 18x16x10 10PCS 18PCS 5PCS 12PCS 12PCS 62PCS J.Hex key M4 L.Protect Foam N.Handle H.Runner 250mm I.GLUE Screw Safety Bracket Kit 35X5mm 10PCS 1PCE 5PCS 1PCE 30PCE 6PCS 2PCS... - Page 4 STEP 1 Runner slide separately(H=H1+H2) Carefully pull out the runner slide(H2)and press plastic clip to fully separate runner slide as diagram shown STEP 2 Attach Cam Pin(A) and Dowel(B) to Panel(C1&C4&C17). 82522 4-10...
- Page 5 STEP 3 Attach Cam Pin(A) and Dowel(B) to Panel(C2&C3). Attach Runner(H1) to Panel(C2&C3) with Screw(C). STEP 4 Attach Panel(C5&C8&C9) to Panel(C2).Insert Panel(C15) to groove. Attach Panel(C4) to Panel(C2). And turn Cam lock(A) to lock into the head of Cam Pin(A). 82522 5-10...
- Page 6 STEP 5 Attach Panel(C4) to Panel(C1&C8&C9). And turn Cam lock(A) to lock into the head of Cam Pin(A). Use Hex Key(J) to attach Leg(C6&C7) to Panel(C4) with Bolt(D). Attach Protect Foam(L) to Panel(C4). STEP 6 Attach Panel(C1) to Panel(C2&C3). And turn Cam lock(A) to lock into the head of Cam Pin(A).
- Page 7 STEP 7 Attach Panel(C17) to Panel(C1&C3&C2). And turn Cam lock(A) to lock into the head of Cam Pin(A). STEP 8 Attach Cam Pin(A) to Panel(C10). Attach Panel(C11&C12& C14) to Panel(C10). And turn Cam lock(A)to lock into the h ead of Cam Pin(A). 82522 7-10...
- Page 8 STEP 9 Insert Panel(C16) to groove. Attach Panel(C13) to Panel(C11&C12) with Screw(K). STEP 10 Attach Runner(H2) to Panel(C11&C12) with Screw(C). Attach Handle(N) to Panel(C10) with Bolt(E). 82522 8-10...
- Page 9 STEP 11 Insert Drawers into body.PLEASE INSERT THE DRAWER WITH TIP KIT LABEL INTO TOP DRAWER SLOT Assembly is complete PLEASE PEEL OFF THE PROTECTIVE LAYER THAT COVERED THE MIRROR PANEL AROUND PANEL C17. 82522 9-10...
- Page 10 Note - Do not drag the furniture as this may cause damage to the legs. Instead, use 2 persons to lift carefully from either end. 82522...
- Page 11 SAFETY BRACKETS INSTRUCTIONS This furniture poses a tipping risk and as such must be secured to a wall using the provided tipping kit. 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud.
Need help?
Do you have a question about the LARISA 82522 and is the answer not in the manual?
Questions and answers