Related Manuals for Amart Furniture FRANCIS 82308
Summary of Contents for Amart Furniture FRANCIS 82308
- Page 1 ASSEMBLY INSTRUCTION FRANCIS TALL CHEST ITEM CODE 82308 Imported by Amart Furniture Pty Ltd.Qld.Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture Customer Service Free call 1800 351 084 82308...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean,level.spacious assembly area.Avoid hard surfaces that may damage the product 2. Take care when lifting.Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly. 4. -
Page 3: Parts List
PARTS LIST A.Cam lock and Cam pin E.Bolt F.Connector G.Screw 8x30 6x35 M4x20 3.5x12 15X35 18x16x10 6PCS 18PCS 10PCS 8PCS 8PCS 45PCS J.Hex key M4 L.Protect Foam H.Runner 250mm I.GLUE Safety Bracket Kit 35X5mm 10PCS 1PCE 1PCE 30PCE 4PCS 2PCS 82308... - Page 4 STEP 1 Runner slide separately(H=H1+H2) Carefully pull out the runner slide(H2)and press plastic clip to fully separate runner slide as diagram shown STEP 2 Insert the Cam Pin(A) and Dowel(B) to the Panel(C1)(C4). 82308...
- Page 5 STEP 3 Insert Cam Pin(A) and Dowel(B) to Panel(C2),(C3). Attach Runner(H1) to Panel(C2),(C3) with Screw(C). STEP 4 Attach Panel(C4),(C5),(C7),(C8). And turn Cam lock(A) to lock into the head of Cam Pin(A).Insert Back Panel(C14) to the groove. 82308...
- Page 6 STEP 5 Attach Panel(C3) to Panel(C4),(C5), (C7),(C8). And t urn Cam lock(A) to lock into the head of Cam Pin(A). Insert the Dowel(B) to the Le g(C6). And then use Hex Key(J) to attach Leg(C6) to Panel(C4) with Bolt(D). Attach the Protect Foam(L) to Leg(C6). STEP 6 Attach the Panel(C1) to Panel(C2),(C3).And turn Cam lock(A) to lock into the head of Cam Pin(A).Attach the Connector(F) to the Back corner with Screw(G).
- Page 7 STEP 7 Insert the Cam Pin(A) to Panel(C9). Attach Panel(C10), (C11),(C13) to Panel (C9). And turn Cam lock(A) to lock into the head of Cam Pin(A). STEP 8 Attach Panel(C15) to the groove. Attach Panel(C12) to Panel(C10),(C11) ,(C13) with Screw(K). 82308...
- Page 8 STEP 9 Attach to Runner(H2) to Panel(C10),(C11) with Screw(C).And attach Handle(C1 6) to Panel(C9) with Bolt(E). STEP 10 Insert the drawers into the body. 82308...
- Page 9 Assembly is complete 82308...
- Page 10 SAFETY BRACKETS INSTRUCTIONS This furniture poses a tipping risk and as such must be secured to a wall using the provided tipping kit. 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud.
Need help?
Do you have a question about the FRANCIS 82308 and is the answer not in the manual?
Questions and answers