Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for tempmate C1
Summary of Contents for tempmate C1
- Page 1 The ultra-low temperature datalogger...
-
Page 2: Table Of Contents
Table of content 1. Intended Use & 1. Intended Use & Important Information ............................2 If the C1 is used in temperatures at dry-ice level, the built- in display will freeze and can become unreadable; it will 2. Disposal Instructions ...................................2... -
Page 3: Device Description Display Indications
empower your supply chain. 3. Device Description Display Indications Display: The built-in display (LCD) informs the user about every status and activity of the data logger and allows a fast and easy first evaluation. USB Port Recording Status Mark Battery Level Alarm Level Display Password Protection... -
Page 4: Equipment & Software
4. Equipment & Software 5. Quick Start Guide The tempmate-C1 comes ready-to-use single units, by default it has a measurement interval of 10 minutes and no alarm ranges. Optionally, the tempmate-C1 can be configured and evaluated via the free configuration software tempbase-Cryo, which allows the user to change every setting and adapt it to their application as well as evaluate recorded data (Graph) from the device or from past measurements. -
Page 5: Operation Instructions
1st STEP PREPARATION • No further preparation is necessary, as the data logger comes ready-to-use; The tempmate-C1 can be kept in stock outside of room temperature conditions (~21°C / 70°F), but this can potentially have an impact on the shelf life; We recommend conditioning the data logger only shortly before the usage 2nd STEP CONFIGURATION Optionally, the user can configure the data logger through tempbase-Cryo before it is started. -
Page 6: Start, Usage, Stop
The display will shut off and the data logger is now stopped measurement interval • If a different signal or no signal appears during the start process, do not use the logger and contact our support Important: support@tempmate.com • The total running time of 90 days begins with the first start of the device. It can be started and stopped without limit within this time frame. •... - Page 7 empower your supply chain. • Once plugged in, the display will show PdF and CSu to indicate that the PDF and CSV reports are being generated. • During this, all recorded data is processed into a readable format and depending on the number of data points, this process can take up to 2 minutes.
-
Page 8: Faq - Frequently Asked Questions
It is advised to configure the C1 once before it the first start, to synchronize date and time and avoid differences. Q: Does the C1 need an external sensor? A: The C1 is built especially to withstand and record temperatures at dry-ice level, down to -90°C, and does not need an external sensor. To protect the device’s USB-port, it is strongly advised to keep it protected with the included protection cap. -
Page 9: Contact Information
GmbH Wannenäckerstr. 41 74078 Heilbronn, Germany Tel. +49-7131-6354-0 sales@tempmate.com www.tempmate.com PLEASE, contact us for further questions.
Need help?
Do you have a question about the C1 and is the answer not in the manual?
Questions and answers