GSM-connection is given. If the data logger can- not send any data, it will store all details internally and The tempmate-GM2 can be used for all kinds of push them into the cloud-service, once the connection applications where monitoring, recording and is given again.
Summary Return Info on the green START button activates the display. Start Button Stop Button The built-in LED informs the user about the alarm status. Part No. / Serial No. / Exp Date GM2-08/2024 · Technical Changes and Errors excepted...
For the data transfer, a cloud-token must be purchased and assigned to each device used. Once started and a valid token is assigned, the tempmate-GM2 will automatically connect to the tempmate-Cloud service and receive the user-defined configuration and other necessary information. Until then, it cannot record or push any information into the tempmate-Cloud.
• Switch to “Administration”, followed by “Wallet” Usage while active • Once the data logger was started and the first data package was uploaded into the tempmate-Cloud system, it can be checked and evaluated within the user’s cloud-account • https://web.tempmate.cloud/ Log-in to •...
The configuration can optionally be changed between each usage. 3rd STEP EVALUATION Primarily, all recorded data is evaluated within the tempmate-Cloud service. Additionally, details in the form of MIN and MAX temperature and further information can be accessed by clicking on “Summary”...
We recommend checking the signal strength indicator on the display. Q: What is a token? A: The cloud-token is a unique line of code, assigned to each device and used to enable data transfer from the GM2 into the tempmate-Cloud within a pre-defined run time.
Need help?
Do you have a question about the GM2 and is the answer not in the manual?
Questions and answers