Advertisement
Quick Links
A PCB PIEZOTRONICS DIV.
Contents
AEC210
3
Test Fixture
6
Sound Source
Accessory
Mic Stand
8
Accessory
10
Connect System
11
System Maintenance
12
Specifications and
Compliance
www.LarsonDavis.com
AEC210 Headphone Measurement System
The AEC210 headphone measurement
system has been assembled with care
to provide the best solution for stable,
repeatable testing of dual-channel
headphones or headsets.
High-quality ¼" TEDS-enabled,
©
prepolarized ICP
microphones
provide consistent and precise audio
feedback. Use the optional base
plate accessory with the AEC210 to
position additional sound sources and
reference microphones.
This system meets the physical
dimensions and angle requirements of
ISO-4869-3.
Advertisement
Related Manuals for PCB Piezotronics LARSON DAVIS AEC210
Summary of Contents for PCB Piezotronics LARSON DAVIS AEC210
- Page 1 AEC210 Headphone Measurement System A PCB PIEZOTRONICS DIV. Contents The AEC210 headphone measurement system has been assembled with care AEC210 to provide the best solution for stable, Test Fixture repeatable testing of dual-channel headphones or headsets. High-quality ¼” TEDS-enabled, ©...
-
Page 2: Warranty
This documentation, including technical data and specifications, is subject to change without notice, and should not be Remove (4) vibration damping feet from the headphone test fixture using the 2.5 mm hex construed as a commitment or representation by PCB Piezotronics, Inc. This publication may contain inaccuracies or typographi cal errors. wrench. Reserve mounting screws. - Page 3 Tools Required drill platform thickness ( ) + 3 mm. 2.5 mm hex wrench (included) Tools Required Parts Needed 2.5 mm hex wrench (included) feet. 4 mounting screws, size m4 (not included) Test Fixture Details locator seat/rod (4) locator block (4) microphone, model 103A25 (2) headphone strap holder (1) (Rear view) Headphone strap holder (F) is...
- Page 4 Adjusting pg 7 Mounting pg 6 Tools Required 2.5 mm hex wrench (included) Sound Source Stand Details Tools Required 2 mounting screws (m4 x 10 mm) wires to cable tie mount using included cable tie. 2.5 mm hex wrench (included) angle by using included mounting screws (S).
- Page 5 Adjusting Mounting pg 7 Tools Required 2.5 mm hex wrench (included) optional base plate, or to any platform, and how to adjust it. #2 Phillips-head screwdriver Tools Required Mic Stand Details Mount mic stand to any platform as shown in Fig. 13. 2.5 mm hex wrench (included) mic holder block screws (S) as shown in Fig.
- Page 6 1/2” calibrator adapter (ADP019) to the calibrator (M), and press power on the Using 2.5 mm hex wrench, loosen mic holder set screw. CAL250 acoustic calibrator calibrator. ® Amplifier Power complete acoustic calibration. Supply* a registered trademark of PCB Piezotronics, Inc.
- Page 7 AEC210 Test Fixture Specifications Optional Accessories AEC210 mounting screw Mechanical m4 x 6 mm) Dimensions (h x w x d) 12.2 x 8.1 x 7.1 in 31.1 x 20.6 x 18 cm Vibration damping feet m4 threads AEC210-SPK Speaker/Stand Specifications Weight 3 lbs 1.4 kg...
- Page 8 PCB工业监视和测量设备 - 中国RoHS2公布表 PCB Industrial Monitoring and Measuring Equipment - China RoHS 2 Disclosure Table 有害物质 汞 镉 部件名称 铅 (Pb) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) (Hg) (Cd) 住房 PCB板 电气连接器 压电晶体 环氧 铁氟龙 电子 厚膜基板 电线 电缆 塑料 焊接...
- Page 9 GMGA MEASURING Address: No. 33 Alley 99/120 Dinh Cong Ha, Dinh Cong Ward, Hoang Mai District, 10000 Hanoi City, Vietnam Telephone: +84 845 969 336 Email: info@gmga.vn Website: https://gmga.vn/...
Need help?
Do you have a question about the LARSON DAVIS AEC210 and is the answer not in the manual?
Questions and answers