Table of Contents
Advertisement
58
Range selector key PHONE
– Press in the left column on the display of a telephone book entry. The connection
to the first call number stored for this entry in the telephone book, will now be
established.
Display information relating to a telephone book entry
– Press the function key
on the right next to the telephone book entry you which
to display. The call numbers stored under this entry are displayed.
– If you press on the entry of a call number, the connection to this call number will
be established.
Search for an entry in the telephone book
– Press on the function key
Search
phone book entry via a search mask.
– Press a selectable character on the keypad while in the search window to accept it
in the entry line.
– Press the function key
to open the input window for digits and special charac-
ters. Press
A-Z
, to change again to the letter input mask.
– You can delete the characters in the entry line starting from the position of the
character insertion cursor from left to right by pressing the function key
– If you press on the button
, the connection to the first call number is estab-
lished, by doing so an assigned name is displayed in the entry line in the telephone
book.
The upper and lower case which is used when searching for a phone book entry, is not
of importance.
Editing field: Indicate specific characters
Some letters are also marked with a small triangle " ". This indicates that specific char-
acters based on this letter can be selected.
Continue to press down on the corresponding button with your finger until a pop-up
window with these specific characters fades in. After pressing the desired characters,
these characters are accepted in the entry line and the pop-up window will close. If no
entries are entered, the pop-up window will close automatically after a few seconds.
in the menu Telephone book to select a tele-
Adapt a call number
Open the display of a call number from the telephone book or a call list as described
in the corresponding chapter.
– Press the arrow keys
– Press on a character inserted into the keypad to accept it behind the character
entry cursor in the entry line.
– The connection to the displayed call number will be established as soon as you
press the function key
Call lists
Only the dialed numbers which are missed, selected and accepted by the mobile
phone preparation program in the vehicle are stored. The call lists stored in a mobile
phone will not be transferred to the vehicle.
– Press on the function key
– Select the call list from which you wish to select a call number by pressing your
selection in the pop-up window. The corresponding list is displayed. Call numbers,
for which an entry exists in the telephone book, will be displayed together with the
.
corresponding name.
You can use the function key
call number.
•
- shows a list of the non-accepted calls from the mobile phone prep-
Missed calls
aration program.
•
Dialled numbers
- shows a list of call numbers, with which the mobile phone prep-
aration program has attempted to establish a connection.
•
- shows a list of calls accepted by the mobile phone preparation
Received calls
program.
If the call number from a call list is stored in the telephone book the stored name in the
telephone book is displayed instead of the call number.
Incoming calls rejected with the function key
accepted calls.
or
to move the character entry cursor in the entry line.
.
in the main menu PHONE.
Calls
, to display further information relating to the stored
will be stored in the call list of the
Hide quick links:
Advertisement
Table of Contents
