Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR SUPERB-OCTAVIA-YETI 11-2009 Manual page 53

Dynamic route Automatic
If the dynamic navigation system is set to Automatic and you are in route guidance
mode, you will automatically be guided around the announced traffic problem on your
route ⇒ page 51, "Requirements for a dynamic route guidance".
After input of relevant traffic information for your route you will be advised of the
change in the current route guidance by means of an acoustic message. You will auto-
matically be guided around announced traffic jams or blocked roads, if this saves time.
Such announcements will take place if a traffic problem affects the original route calcu-
lation, the traffic problem has been solved and the navigation system can see only one
possibility of driving the actually most advantagous route.
Requirements for a dynamic route guidance
TMC (Traffic Message Channel) is a digital radio data service for continuous transmis-
sion of traffic information.
The unit has a continuous background of TMC traffic reports providing a TMC station
at the current location can be received.
The quality of the transmitted traffic reports depends on the broadcast editing carried
out by the radio station. The reception of the TMC traffic reports cannot be switched
on or off.
The station you are listening to does not have to be a TMC station.
TMC traffic reports can only be evaluated and displayed by the unit if the navigation
data for the currently driven area is stored in the unit memory or can be called up via
an inserted navigation DVD.
The current TMC traffic reports can be displayed by pressing the range selector key
.
TMC
Note
•
There may not be any advantage in avoiding the traffic jam if, as a result of the TMC
traffic reports, the diversion is also heavily congested.
•
You can manually block the information for the route in front of you if traffic prob-
lems ahead have not yet been included in the TMC traffic reports ⇒ page 52.
Range selector key NAV (Navigation)
Fade in route or manoeuvre list
The route or manoeuvre list can only be displayed during a route guidance.
Split-screen in the map display
– Press the range selector key
MAP
– Press on the function key on the top left in the split-screen and on
in the pop-up window. The manoeuvre will be displayed
can only be called up via the main menu Navigation.
Main menu Navigation
– You can open the main menu Navigation during route guidance by pressing the
range selector key .
NAV
– Press on the function key in the main menu Navigation and on
Route
Manoeuvre list in the pop-up window.
In the Manoeuvre list the turning points still to be passed will be displayed in the list
by means of direction arrows. Street name or street description refers to the street into
⇒ fig.
which to turn 23.
In the Route list the street names or street descriptions for the parts of the journey still
to be driven are displayed in a list.
Fig. 23 Manoeuvre list in the
map display.
BAT-20H647
in the map display to open the split-screen.
Manoeuvre list
⇒ fig.
23. The route list
Route list
51
or