Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR SUPERB-OCTAVIA-YETI 11-2009 Manual page 47

Save tour
A tour can only be displayed in the tour mode and therefore saved only in the tour
mode.
⇒ page 43, fig. 18
– Press function key
Memory
menu Navigation.
– Press on Save tour in the pop-up window. An entry window for free text entry will
open.
– Allocate a name for your tour.
– Confirm the displayed name by pressing
– The message "Tour saved" will appear. Press
You can store max. 10 tours in the destination memory.
Call up a saved tour
– Press on the function key
Extras
.
Tour mode
– Press on the function key Memory
– Press on the function key next to a tour name in the menu Load tour to display
information relating to the corresponding tour in the menu Tour details.
– In the menu Tour details press on the function key
name of a tour in the menu Load tour so that the selected tour is displayed in the
main menu Navigation.
– Press the function key to start the route guidance.
Strat
Edit a saved tour
A tour can only be displayed in the tour mode and therefore only stored in the tour
mode. Call up the tour to be edited.
– If you press at the top of the selected tour message the tour plan for this tour will
open.
to save a tour displayed in the main
.
OK
to confirm the message.
OK
in the main menu Navigation and then on
and on Load tour in the pop-up window.
or press directly on the
Select
Range selector key NAV (Navigation)
– Alternatively, open the tour plan by pressing the function key
Process tour in the pop-up window.
– Press on the function key next to the destination in the tour plan
process. The pop-up window with the possible options for processing this input
will open.
– If you press the function key next to the starting point of the tour " ", you will
only have the possibility to determine, via the
the starting point. The starting point has already been determined automatically
via the GPS position definition of the unit and can therefore not be processed.
– If you press the function key next to one of the other destinations, you will be
offered further modification options.
Options for determining a tour destination
- opens the menu Destination data for a detailed display of the selected destina-
Info
tion. Press the function key Show on map
Pressing the function key will switch you back to the detailed display.
- changes a precise "Stopover" in "Close to" and vice versa.
Change type
- Renewed pressing on will only start the route guidance to this tour desti-
Start Start
nation, possible stopovers will be ignored. Press
the tour plan without starting the route guidance.
- deletes after further confirming the displayed tour destination.
Delete
- Press on to select an entry behind which the selected tour destina-
Move Continue
tion should be moved.
Dest. entry - for input of a further tour destination.
. Press on
Extras
you wish to
, the first stopover after
Dest. entry
to be shown the destination on the map.
to change back to the display of
Back
45