Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR SUPERB-OCTAVIA-YETI 11-2009 Manual page 49

- opens a list with the waypoints of the tour currently displayed in
Edit waypoint tour
the menu Waypoint navigation. The waypoints in the list can be displayed, deleted,
moved or renamed in the map. Further waypoints can be added via the selection from
the map or the input of the GPS position. If you wish to edit a waypoint tour other than
the one displayed, you must first of all press the function key
button Edit waypoint tour .
Display a waypoint tour
– Press on the function key
Waypoint tour
– Press on the function key
Edit waypoint tour
– If a tour is already being displayed in the menu Waypoint navigation you must
select by pressing in the following menu whether you wish to display the indicated
or a
Extend existing tour New tour
– Give a short and clear name to the waypoint tour. Confirm the displayed name by
pressing .
OK
– Select an acceptance mode by pressing the respective key.
– Press the function key
Automatic
waypoints (recommended) during the display.
and then the
Memory
Fig. 20 Display in the map illus-
tration with a split-screen in the
compass display.
in the menu Waypoint navigation.
in the pop-up window.
.
to allow the system to automatically set the
Range selector key NAV (Navigation)
– Press the function key if you wish to set all waypoints yourself during the
Manual
display.
– After starting the display, the number of used and still available waypoints as well
as the set display mode will be indicated in the menu Waypoint navigation.
– Press the range selector key
MAP
pressing of the range selector key
⇒ fig.
20.
– Press on the range selector key
NAV
navigation.
– Press the function key Save current position as waypoint
ally. When in the map display you can find this function key in the pop-up window
⇒ fig. 20
for the function key
Record
display".
Function key in the map display
Record
The waypoints used up to now for the tour and those still available are indicated in the
function key .
Record
⇒ fig. 20
Pressing the function key Record
display.
Stop - ends the recording; the last set waypoint becomes the endpoint of the
waypoint tour.
- switches on and off the function indicating that the waypoints
Automatic recording
are set automatically via the sensors in the vehicle when changing the direction. A tick
in the check-box indicates that the function is switched on.
Save current position as waypoint - sets a manual waypoint at the current driving
position.
Driving a stored waypoint tour
Before you start driving a waypoint tour, you must be in the vicinity of the desired
starting point of this waypoint tour.
to change into the map display. Repeated
MAP will open and close the split-screen
to switch back into the main menu Waypoint
to set the waypoints manu-
⇒ page 47, "Function key in the map
opens a pop-up window for controlling the
47