Skoda OCTAVIA - 05-2010 Owner's Manual page 81

80 Seats and Stowage
– Insert the cross rod into one of the mounts
– In the same way, fix the cross rod to the other side of the vehicle, mount
– Fold the storage compartment cover downwards.
Folding
– Fold down the storage compartment cover behind the rear seats
fig. 76.
– Pull the cross rod back slightly, first on the one side then on the other side and take
the cross rod out of the mounts
– Hold the cross rod in such a way that the net partition can roll up slowly and
A
without damage into housing
B
– Fold the storage compartment cover downwards.
If you wish to use the entire luggage compartment, you can remove the luggage
 page 78, fig.
compartment cover
WARNING

First check for yourself that the cross road is inserted into the mounts
the front position!

Pay attention that the rear seat backrest is correctly interlocked. It is only
then that the three-point seat belt for the middle seat can reliably fulfil its
function.
A
and push the cross rod forwards.
C
 page 79,
A
.
C
.
73.
Use the luggage net partition behind the front seats
A
.
C
Pulling out
– Fold the rear seats forwards  page 72.
– Pull the luggage net partition at the bracket
– Insert the cross rod into the mount
forwards.
– In the same way, fix the cross rod to the other side of the vehicle, mount
A
in
C
Folding
– Pull the cross rod back slightly, first on the one side then on the other side and take
the cross rod out of the mounts
– Hold the cross rod in such a way that the luggage net partition can roll up slowly
and without damage into the housing
– Fold the rear seats back into their original position.
WARNING

The belt locks and the belts must be in their original position after folding
back the seat cushions and the seat backrests - they must be ready to use.

The seat backrests must be securely interlocked in position so that no
objects in the luggage compartment can slide forwards if there is sudden
braking - risk of injury!
Fig. 77 Pull out the luggage net parti-
tion
A A
out of the housing
A B
A
first on the one side and push the cross rod
C
A  fig.
77.
C
A
.
B
 fig.
77.
A
.
C