Skoda OCTAVIA - 05-2010 Owner's Manual page 134

Store voice recording of a contact
For each entry in the menu Phone book, you can store your own voice entry for the
voice control with Voice Tag - Record. You can also store your own voice entry using
voice control in the menu "further options".
Connection of the telephone with the hands-free system
In order to connect a mobile phone with the hands-free system, it is necessary to
connect the telephone to the hands-free system. Detailed information on this is
provided in the operating instructions of your mobile phone. The following steps must
be carried out for the connection.
Connecting the telephone with the hands-free system via the HFP
profile
®
– Activate the Bluetooth in your telephone and the visibility of the mobile phone.
– Switch on the ignition.
– Select the menu Phone - Phone search in the information display and wait until
the control unit has ended the search.
– Select your mobile phone in the menu of the units found.
– Within 30 seconds enter in your telephone the 16 digit PIN of your control unit,
which is indicated in the information display* and confirm it according to the
instructions on the display of your telephone.
– To store a new user or to download the telephone book and the indentification
data of the SIM card into the control unit, follow the instructions in the information
display* and on the mobile phone.
Connecting the telephone with the hands-free system via the rSAP
profile
®
– Activate the Bluetooth in your telephone and the visibility of the mobile phone.
For certain mobile phones it is necessary to switch on first the rSAP function.
– Switch on the ignition.
– Select the menu Phone - Phone search in the information display and wait until
the control unit has ended the search.
Using the system Safety
– Select your mobile phone in the menu of the units found.
– Within 30 seconds enter in your telephone the 16 digit PIN of your control unit,
– If your SIM card is blocked by a PIN code, enter the PIN of the SIM card of your tele-
– For the first storage of a new user follow the instructions in the information display.
– To download the telephone book and the indentification data of the SIM card into
After connecting the telephone with the hands-free system via the rSAP profile, the
telephone deregisters from the GSM network and only the control unit ensures the
communication with the network. In the telephone only the interface for Bluetooth
remains active. In this case, you can only separate from the control unit, switch off the
Bluetooth
some countries).
The telephone connects preferentially via the rSAP profile.
If the PIN was stored, the telephone is automatically detected and connected with the
hands-free system when the ignition is switched on the next time. Check on your
mobile phone if it was automatically connected.
Disconnecting the connection
The connection to the hands-free system is disconnected:

tion is disconnected).


On vehicles which are fitted out with radio or navigation at the factory, it is possible to
terminate the telephone call after removing the key from the ignition lock by pressing
Driving Tips General Maintenance
which is indicated in the information display* and confirm it according to the
instructions on the display of your telephone.
phone. The telephone connects to the control unit (during the first connection you
can only select in the information display* and when the vehicle is stationary, if the
PIN should be stored).
the new control unit, confirm again the command rSAP in your mobile phone.
®
connection or select the number of the emergency call 112 (only valid for
When removing the key from the ignition lock (during a telephone call, the connec-
After disconnecting the connection in the telephone.
By disconnecting the connection in the information display*.
Breakdown assistance
Communication 133
®
Technical Data