Table of Contents
Advertisement
3. Installation
DIP SW 6
OFF
Disable Periodic Cleaning Request
ON
Enable Periodic Cleaning Request
Data Compression ON Switch
3.1.1.
Data compression can be selected by DIP switch.
DC Control-1
DC Control-2
OFF
OFF
ON
ON
3.1.2.
Power Connector
The power connector is illustrated as Figure 3-4.
3.1.3.
IDE Interface Connector
Figure 3-5 illustrates IDE 40 pin connector and table 3-3 shows the assignments for the pins of the connector.
3-2
Table 3-2: Periodic Cleaning Request (Refer to 4.5.1.2)
OFF
Compression disabled at power-on. The host is allowed to control
compression.
ON
Compression disabled at power-on. The host is not allowed to control
compression.
OFF
Compression enabled at power-on. The host is allowed to control
compression.
ON
Compression enabled at power-on. The host is not allowed to control
compression.
Figure 3-3: Data Compression Switches
4
3
5V
GND
Figure 3-4: Power Connector
Pos 39
Pos 40
Figure 3-5: IDE Device Connector
Definition
Definition
2
1
GND
12V
Pos 1
Pos 2
Pos 20 (Pin removed)
SONY AIT-2 Turbo drive SDX-560V series Ver.1.0
Advertisement
Table of Contents
