Table of Contents
Advertisement
Quick Links
Item # 1001485952
Model #PH01-S-PC
USE AND CARE GUIDE
Table Top Patio Heater
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
patio heater.
continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HAMPTON BAY PH01-S-PC
Summary of Contents for HAMPTON BAY PH01-S-PC
- Page 1 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU patio heater. continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
-
Page 3: Table Of Contents
Table of Contents Table of Contents ........2 Leak Testing . - Page 4 Safety Information (continued) WARNING: ONLY use this appliance on a at LEVEL non WARNING: In the event of an uncontrollable re, ammable surface or ground. immediately disconnect the gas cylinder moving it away from re and contact the re services. DO NOT PUT YOURSELF AT RISK! WARNING: When positioning, ensure the unit is a minimum of 40 in.
-
Page 5: Warranty
Warranty 1 YEAR LIMITED WARRANTY WHAT IS COVERED We warrant to the original consumer purchaser that all aspects of this product will be free of defects in material and workmanship for 1 year from the date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. This warranty shall be effective from the date of purchase as shown in the purchaser’s receipt. -
Page 6: Pre-Assembly
Pre-Assembly PLANNING ASSEMBLY Customer Service at 1-855-HD-HAMPTON. When you are ready to start, make sure that you have the right tools at hand, plenty of space and a clean dry area for assembly. NOTE: It is recommended that the carton is cut open and WARNING: While every precaution has been made in the manufacture of this product, care must be taken during during assembly. -
Page 7: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS Item Description Reflector Burner Screen Mesh Guard Burner Tank Housing Base... -
Page 8: Technical Data
Pre-Assembly (continued) TECHNICAL DATA Overall Height 36.4 in. approx. Overall Weight 20.28 lbs Overall Width 21 in. Heater Heat Input (·Qn) 11,000 Btu/h Heater Gas Consumption 0.45 Lbs per hour Heater Injector Size 0.039 in. Setting Pressure 11.0 in. per W.C Regulator Outlet Pressure 11.0 in. -
Page 9: Assembly
Assembly Attach tank housing to base Attach burner to tank housing Unscrew the four M5X 25 bolts that are preassembled Unscrew the four 3/16 in. bolts that are preassembled on the on the tank housing ( E ) . tank housing ( E ). Put the burner ( B ) on the tank housing ( E ), then fix them with the four 3/16 in. - Page 10 Assembly (continued) Assemble the burner screen Attach mesh guard to burner assembly Attach the three reflector stud ( AA ) to the burner Put the mesh guard ( C ) over the burner screen and down screen ( B ). Attach the three M6 nuts (GG ) to the onto the burner assembly.
- Page 11 Assembly (continued) Attach the reflector Attach the gas tank Turn off the control knob of the burner. Place the three washers ( EE ) over the reflector studs ( AA ) Fix the 1.02 Lb gas tank (not included) to regulator (rotate the tank on the burner screen ( B ).
-
Page 12: Operation
Operation Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area. Connect the propane gas tank to the regulator and turn the valve on the unit to the "off"position. Brush a soap and water mixture on all connections. Turn the gas supply on;... - Page 13 Operation (continued) Before performing any maintenance always disconnect propane gas tank. Keep the heating item free and clear from combustible materials. Visually inspect burner for obstructions and keep tank enclosure free and clear from debris. Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner is completely cooled down.
-
Page 14: Leak Testing
Operation (continued) LEAK TESTING Your patio heater has been checked at all factory connections for leakage. To check the connection at the gas hose/regulator/cylinder: Ensure you are in a well ventilated area. Open the gas control valve on the bottle. Check for leaks by brushing a solution of 50% water and 50% dish soap over the gas system joints, including all valve connections, hose connections and regulator connections. -
Page 15: Maintenance
If your heater needs maintenance or is not working properly, please contact your local authorized agent for service. It is a necessity to contact an authorized source for replacement of parts and/or servicing. Spare parts may be obtained by contacting Hampton Bay Customer Service at 1-855-HD-HAMPTON. Care & Cleaning Regularly clean your patio heater between uses and especially after extended periods of storage. -
Page 16: Troubleshooting
Troubleshooting Problem Cause Solution The burner will not light. The burner injector is clogged. Clean the burner injector. There is low gas supply pressure. Call your gas supplier. The burner flame goes There is low gas pressure. Call your gas supplier. off immediately after ignition. - Page 17 Page intentionally left blank.
- Page 18 Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Need help?
Do you have a question about the PH01-S-PC and is the answer not in the manual?
Questions and answers