Table of Contents
Advertisement
Quick Links
Configuration of KEBA P-30 X and C Series
EV charger
Applicable regions: Europe
© 2024 Enphase Energy. All rights reserved. Enphase, the e and CC logos, IQ, and certain other marks listed at
https:/ /enphase.com/trademark-usage-guidelines
Data subject to change.
are trademarks of Enphase Energy, Inc. in the U.S. and other countries.
T ECH NI CA L B RIE F
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for enphase KEBA P-30 X Series
Summary of Contents for enphase KEBA P-30 X Series
- Page 1 Configuration of KEBA P-30 X and C Series EV charger Applicable regions: Europe © 2024 Enphase Energy. All rights reserved. Enphase, the e and CC logos, IQ, and certain other marks listed at https:/ /enphase.com/trademark-usage-guidelines are trademarks of Enphase Energy, Inc. in the U.S. and other countries.
-
Page 2: Table Of Contents
Scope of this document....................4 Preconditions for configuring the charging equipment..........4 Supported KEBA P-30 models..................4 Configuration of the Modbus TCP Interface............... 5 Commissioning the KEBA EV Charger via Enphase Installer App......7 References......................... 8 Revision history.........................9 © 2024 Enphase Energy Inc. All rights reserved. -
Page 3: Environmental Protection
User documentation is updated frequently; Check the Enphase website ( enphase.com/contact/ support) for the latest information. Enphase did not author and does not take any responsibility for the functionality or accuracy of information for third-party content used in this document. Copyright © 2024 Enphase Energy Inc. All rights reserved. -
Page 4: Scope Of This Document
IQ Battery (if installed) and its ability to charge from the grid (if allowed by regulation). For further information on the installation of the IQ Energy Router and other related components provided in the IQ Energy Router+ box, refer to the respective installation guides on the Enphase documentation page. -
Page 5: Configuration Of The Modbus Tcp Interface
Downloads & Updates eMobility | KeContact | KEBA Enphase is retesting the technical integration with new firmware versions to ensure full functionality. A current list of the supported firmware by vendor is available here: Third-party EV charger firmware versions that support integration with the Enphase Energy System - Support | Enphase 4. - Page 6 The login credentials are provided with the unit on the configuration label. At first login, these credentials must be changed. Align with the homeowner on how to proceed in this step. © 2024 Enphase Energy Inc. All rights reserved. November 2024...
- Page 7 11. Ensure that the KEBA is powered on and connected to the same network as the IQ Energy Router. 12. The configuration of the KEBA P-30 is now finished. Follow the next steps for commissioning in the Enphase Installer App. © 2024 Enphase Energy Inc. All rights reserved. November 2024 TEB-00205-1.0-EN...
-
Page 8: Commissioning The Keba Ev Charger Via Enphase Installer App
Figure 3: Screen capture of the Enphase Installer App where the auto-discovery of the KEBA EV charger can be validated. 5. When the KEBA EV charger is paired, the normal commissioning process for the site as guided by the Enphase Installer App can be continued. -
Page 9: Revision History
References KEBA download and updates KEBA eMobilty App KEBA Support 7. Revision history Revision Date Description TEB-00205-1.0 November 2024 Initial release. © 2024 Enphase Energy Inc. All rights reserved. November 2024 TEB-00205-1.0-EN...
Need help?
Do you have a question about the KEBA P-30 X Series and is the answer not in the manual?
Questions and answers