enphase IQ EV Charger 2 Quick Install Manual
  1. Manuals
  2. Brands
  3. enphase Manuals
  4. Battery Charger
  5. IQ EV Charger 2
  6. Quick install manual
enphase IQ EV Charger 2 Quick Install Manual

enphase IQ EV Charger 2 Quick Install Manual

Hide thumbs Also See for IQ EV Charger 2:
Table of Contents

Advertisement

Quick Links

Download this manual
ENGLISH
IQ EV Charger 2
Quick install guide
Scan for the latest guide
Scannen Sie nach dem neuesten
Leitfaden
Scannez pour le dernier guide
Scan naar de nieuwste handleiding
Escanea para el último guía
Nuskaitykite naujausią gidą
M OD E L
I Q-E VS E- E U -3 0 3 2- 00 0 5 - 1 3 00
IQ- EV SE - E U -3 0 3 2- 01 0 5 - 13 0 0
V ER SI ON 1 . 0
NO VE M B E R 2 02 4
Ì140-00515-01pÎ
140-00515-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IQ EV Charger 2 and is the answer not in the manual?

Questions and answers

Related Manuals for enphase IQ EV Charger 2

Summary of Contents for enphase IQ EV Charger 2

  • Page 1 ENGLISH IQ EV Charger 2 Quick install guide Scan for the latest guide Scannen Sie nach dem neuesten Leitfaden Scannez pour le dernier guide Scan naar de nieuwste handleiding Escanea para el último guía Nuskaitykite naujausią gidą M OD E L...
  • Page 2 This page is left blank intentionally. EN-2...

  • Page 3: Table Of Contents

    6. Mounting the wall bracket 6.1. Mounting on a timber or concrete wall 6.2. Mounting on a single vertical timber stud 7. Wall-mounting the IQ EV Charger 2 8. Mounting the connector holster 9. Power supply wiring 9.1. Supply wiring for tethered Type-2 model 9.1.1.
  • Page 4 10.2. Communication cable wiring through the bottom entry 10.2.1. Tethered Type-2 model 10.2.2. Socketed Type-2 model 11. Activating the IQ EV Charger 2 11.1. Activation through the Enphase Installer App 11.2. Activation through the Enphase App 12. Finishing the installation 13.

  • Page 5: Introduction

    Save more with AI-driven home energy management, optimising for the lowest utility rates and efficient solar charging. Up to 100% of excess solar power can be directed to EV charging, maximising savings. Designed for all European grids, the IQ EV Charger 2 offers wired and wireless data connectivity for flexible installation.

  • Page 6: Pre-Installation Checklist

    EVSE Figure 4: Integrated with an Enphase PV + Battery system + HEMS configuration NOTE: The Integrated with an Enphase PV + Battery system + HEMS configuration is supported by Enphase only in a limited number of countries. IQ EV Charger 2 installation configurations technical brief For more information on each of the supported configurations, see the 3.

  • Page 7: What's In The Box

    For information on the supported configurations, see the • Hardware upgrades are recommended to leverage all smart features at the existing Enphase sites. • Ensure Production and Consumption CTs are installed correctly at PV-only sites for monitoring solar production and total home IQ EV Charger 2 installation configurations technical load.

  • Page 8: Socketed Type-2 Model

    NOTE: The socketed model does not include a Type-2 connector holster and cable tidy kit or a Type-2 to Type-2 charging cable. These items can be acquired separately from the Enphase Store or through your distributor. 5. Tools/Additional items required The following tools/items are provided by the installer: •...

  • Page 9: Mounting The Wall Bracket

    • Wire stripper • Crimping tool 6. Mounting the wall bracket IQ EV Charger 2 can be mounted on a variety of surfaces. • Mounting on a timber or concrete wall on page 9 • Mounting on a single vertical timber stud on page 10 6.1 Mounting on a timber or concrete wall...

  • Page 10: Mounting On A Single Vertical Timber Stud

    1. Lift and position the IQ EV Charger 2 next to the wall bracket. 2. Secure the bottom of the charger by inserting the mounting guide protrusion at the bottom of the IQ EV Charger 2 into the corresponding socket on the base of the wall bracket.
  • Page 11 3. Insert the charger into the wall bracket. Carefully align the prongs on the left and right sides of the wall bracket with the corresponding gaps on the back of the charger enclosure. Slide the prongs through the gaps until the charger is securely in place.

  • Page 12: Mounting The Connector Holster

    4. Close the holster with the aesthetic cover. 9. Power supply wiring The IQ EV Charger 2 has both a tethered and socketed model. Based on the model, see one of the following topics: • Supply wiring for tethered Type-2 model on page 13 •...

  • Page 13: Supply Wiring For Tethered Type-2 Model

    9.1.2 Supply wiring through the rear cable entry Pierce the sealing grommet with input cables from the rear of the IQ EV Charger 2 and terminate the conductors. NOTE: The unused cable entry in the middle can be used for Ethernet communication. For more information, see...

  • Page 14: Supply Wiring Through The Bottom Cable Entry

    9.1.3 Supply wiring through the bottom cable entry 1. Replace the plug on the input side with the provided M32 cable gland. Torque this gland to 11.3 N m. If the charger is being installed in a single-phase configuration, the provided cable gland and M32/M25 reducer can be used instead of the M32 cable gland.

  • Page 15: Completing Supply Wiring

    NOTE: Check the torque of all electrical connections, including the factory-made terminations because they may loosen during transportation. NOTE: To learn how to connect the IQ EV Charger 2 to suit your grid supply and earthing arrangement, see Phase wiring diagrams for grid supply types on page 18.

  • Page 16: Supply Wiring Through The Rear Cable Entry

    9.2.2 Supply wiring through the rear cable entry Pierce the sealing grommet with input cables from the rear of the IQ EV Charger 2 and terminate the conductors. NOTE: The unused cable entry in the middle can be used for Ethernet communication. For more information, see...

  • Page 17: Completing The Supply Wiring

    NOTE: Check the torque of all electrical connections, including the factory-made terminations because they may loosen during transportation. NOTE: To learn how to connect the IQ EV Charger 2 to suit your grid supply and earthing arrangement, see Phase wiring diagrams for grid supply types on page 18.

  • Page 18: Phase Wiring Diagrams For Grid Supply Types

    9.3 Phase wiring diagrams for grid supply types The IQ EV Charger 2 must be wired appropriately according to the earthing arrangement of the grid supply and the number of phases connected to the charger. Determine the configuration in which the charger will be installed and refer to the appropriate diagram.
  • Page 19 L1 are involved. This helps to avoid overloading L1. Additionally, capturing phase rotation information during the activation process (see Activating the IQ EV Charger 2 on page 23) is important to ensure accurate consolidation of consumption data. The following figure shows the recommended phase rotation.

  • Page 20: Grid Supply With An It Earthing (Without Neutral)

    Figure 7: Wiring diagram of two-phase without Neutral Figure 8: Wiring diagram of three-phase without Neutral 10. Wiring connections for communication The IQ EV Charger 2 hardware supports several forms of wired communication, as shown in the following figure. USB Type C RS 485...

  • Page 21: Communication Cable Wiring Through The Rear Cable Entry

    Pierce the sealing grommet with Ethernet cables from the rear of the IQ EV Charger 2, then terminate the conductors. 10.1.2 Socketed Type-2 model Pierce the sealing grommet at the bottom right with Ethernet cables from the rear of the IQ EV Charger 2, then terminate the conductors.

  • Page 22: Communication Cable Wiring Through The Bottom Entry

    10.2 Communication cable wiring through the bottom entry 10.2.1 Tethered Type-2 model 1. Replace the plug at the bottom with the provided M25 cable gland and sealing insert. Torque the gland to 9 N m. 2. Run the Ethernet cable through the holes in the sealing insert and M25 cable gland, then connect it to the respective connectors, as shown in the following figure.

  • Page 23: Socketed Type-2 Model

    11. Activating the IQ EV Charger 2 The IQ EV Charger 2 can be activated (commissioned) through the Enphase Installer App or the Enphase App. Activating the charger unlocks its smart features, including dynamic power adjustment to prevent overloading the main supply, AI-based optimisation for...

  • Page 24: Activation Through The Enphase Installer App

    You can use the IQ EV Charger 2 without activation, though doing so limits its smart features. The device requires internet access through Ethernet or Wi-Fi (configured during activation) to complete the activation.

  • Page 25: Troubleshooting

    14.1 MID meter display The IQ EV Charger 2 includes an integrated MID meter and display. Upon power-up, the device shows the MID firmware version and CRC, as required for MID compliance, followed by the charger’s lifetime energy consumption—each displayed for 5 seconds before the screen goes blank.

  • Page 26: Accessories

    All LEDs indefinitely blinking ON/OFF Fault/Error 15. Accessories Enphase offers various accessories compatible with the IQ EV Charger 2, available for purchase at enphase.com. Description TYPE2-CABLE-7.5M-32A-3P-SOCKET Three-phase, 32 A, Type-2 connector cable for socketed IQ EV Charger 2 TYPE2-CABLE-7.5M-32A-3P-WIRED Three-phase, 32 A, Type-2 connector cable for tethered IQ EV Charger 2 TYPE2-CABLE-7.5M-32A-1P - WIRED...

  • Page 27: Safety Information

    NOTE: This indicates information that is very important for optimal system operation. Follow instructions closely. Safety instructions DANGER: Risk of electric shock. Risk of fire. Do not attempt to repair or service the IQ EV Charger 2 alone. Only a certified electrician shall install, troubleshoot, or otherwise service the IQ EV Charger 2.
  • Page 28 WARNING: This vehicle charger unit is intended only for charging electric vehicles not requiring ventilation during charging. WARNING: DO NOT operate the IQ EV Charger 2 or attempt to use the Type-2 connector if it is physically open, cracked, frayed, or otherwise visibly damaged. Immediately contact Enphase Support for service, referring to the Enphase Support section in this manual.

  • Page 29: Corporate Headquarters Contact Information

    Enphase Energy, Inc. reserves the right to make changes to this product without further notice. Changes or modifications to this product by other than an authorized service facility may void the product warranty. Enphase Energy, Inc. does not assume any liability for damage or defects, in the broadest sense, from or related to the use or interpretation of this document.
  • Page 30 140-00515-01-EN-2024-11-22 Applicable regions: Europe ©  2024 Enphase Energy. All rights reserved. Enphase, the e and CC logos, IQ, and certain other marks listed at https:/ /enphase.com/trademark-usage-guidelines are trademarks of Enphase Energy, Inc. in the U.S. and other countries. Data subject to change.

This manual is also suitable for:

Iq-evse-eu-3032-0005-1300Iq-evse-eu-3032-0105-1300

Table of Contents