Red Hat Enterprise Linux, Miracle Linux, Asianux - F-SECURE LINUX SECURITY Manual

To use prelinking, you have to turn on the software installation mode before prelinking and turn
it off when prelinking is finished. This allows the prelink to make the changes in system files in
a controlled way. For example:
# /opt/f-secure/fsav/bin/fsims on
# prelink -a
# /opt/f-secure/fsav/bin/fsims off
Note: This operation cannot be automated easily - Turning off the software installation
mode creates a new baseline, which needs to be signed with a passphrase that the
administrator has to enter.

Red Hat Enterprise Linux, Miracle Linux, Asianux

The following steps are required to install the product on a computer running Red Hat Enterprise
Linux, Miracle Linux or Asianux.
Red Hat EL 3 / MIRACLE LINUX 3 (Asianux 1.0)
Following packages are needed.
• gcc
• glibc-devel
• glibc-headers
• glibc-kernheaders
• kernel-source
Red Hat EL 4 / MIRACLE LINUX 4 (Asianux 2.0)
Compared to the default installation, the following additional rpm packages are needed.
• gcc
• glibc-devel
• glibc-headers
• glibc-kernheaders
At least one of the following rpm packages are needed.
• kernel-devel
• kernel-hugemem-devel
F-Secure Linux Security | Before You Install | 87