F-SECURE LINUX SECURITY Manual page 79

1. Use the following command to create the initial product configuration:
/opt/f-secure/fsav/fsav-config
The script will display some questions. The default value is shown in brackets after the
question. Press ENTER to select the default value.
2. Select the language you want to use in the Web User Interface.
Select language to use in Web User Interface
[1] English (default)
[2] Japanese
[3] German
3. Enter the keycode to set up the full, licensed version of the product. Enter the keycode in the
format you received it, including the hyphens that separate sequences of letters and digits.
If you want to evaluate the product and do not have a keycode, press ENTER.
4. Select between the stand-alone and centrally managed installation.
a) In the centrally managed installation, enter the address of the F-Secure Policy Manager
Server.
Address of F-Secure Policy Manager Server:
[http://localhost/]:
b) In the centrally managed installation, enter the location of the admin.pub key. This is
the key that you created during F-Secure Policy Manager Console Installation.
5. Select whether you want to allow remote accesses to the Web User Interface.
Allow remote access to the web user interface? [no]
6. Select whether the Web User Interface can be opened from the localhost without a login.
Allow connections from localhost to the web user interface
without login? [yes]
7. Enter the user name who is allowed to use the Web User Interface.
Please enter the user name who is allowed to use the web user
interface.
Note: The user name is a local Linux account. You have to create the account if it does
not exist yet. Do not use the root account for this purpose.
F-Secure Linux Security | Command Line Tools | 79