F-SECURE LINUX SECURITY Manual page 45

3. Select how to treat password protected archives. Password protected archives cannot be
scanned for viruses.
• Turn on Treat password protected archives as safe
protected archives. The user who opens the password protected archive should have an
up-to-date virus protection on the computer if password protected archives are treated as
safe.
• Turn off Treat password protected archives as safe
archive.
4. If you want the archive scan to stop immediately when it finds an infected file, turn on
on first infection inside an archive
the product scans the whole archive.
Riskware Scanning
Select the primary and secondary action to take when riskware is found.
In the I want to... page in the web user interface, click
and configure advanced virus scanning settings.
1. Select the primary action to take when riskware is found. Choose one of the following actions:
• Select Report and deny access
access to it. No other action is taken against the infected file. View
alerts. (Not available during the manual scanning.)
• Select Rename to rename the riskware file and remove its execute permissions. Renamed
file stays on the computer, but it cannot cause any damage. The renamed file has
.riskware extension.
• Select Delete to delete the riskware file.
• Select Deny access
or reports. (Not available during the manual scanning.)
• Select Report only.
By default, the primary action for infections is
2. Select the secondary action. The secondary action takes place if the primary action cannot
be performed.
By default, the secondary action is
3. In the Excluded Riskware
Use the following format to specify riskware you want to exclude and separate each entry
with a semicolon (;) Category.Platform.Familywhere category, platform or family can
be * wildcard.
For example, Client-IRC.*.* excludes all riskware entries in the Client-IRC category.
to stop scanning the archive. If the setting is turned off,
to display and alert about the found riskware and block
to block the access to the riskware file without sending any alerts
Report
Deny access.
field, specify riskware types that the product should not scan.
F-Secure Linux Security | Using the Product | 45
to allow access to password
to deny users from accessing the
Modify advanced settings...
Alerts to check security
only.
Stop
to view