Page 1
FPS Gaming Mouse CHARGING THE MOUSE IMPORTANT: The M75 WIRELESS mouse must be fully charged before its first use. Connect the mouse to an available USB 2.0 or 3.0 port on your PC with the USB CHARGING / DATA CABLE (N).
Page 2
• Connect the USB WIRELESS RECEIVER (L) to an available USB 2.0 or 3.x port located on the front panel of your PC or nearby USB port. (e.g. on CORSAIR MM700, MM800, MM1000 mousepads). • The MULTIPURPOSE INDICATOR & CUSTOMIZABLE RGB (H) will turn solid white when connected.
Page 3
• Power on your mouse by holding down on the POWER / WIRELESS MODE BUTTON (K) for 5 seconds, or until the MULTIPURPOSE INDICATOR & CUSTOMIZABLE RGB (H) lights up. • Press and hold down the SCROLL WHEEL (C) and then press the POWER / WIRELESS MODE BUTTON (K) once to enter Bluetooth pairing mode.
CHANGING DPI AND PROGRAMMABLE BUTTONS To tailor your DPI and programmable buttons to your preferences, you must have iCUE installed on your device. • Download the iCUE software from www.corsair.com/downloads. • Run the installer program and follow instructions for installation.
Page 5
• Connect the USB WIRELESS RECEIVER (M) to an available USB 2.0 or 3.x port located on the front panel of your PC or nearby USB port. (e.g. on CORSAIR MM700, MM800, MM1000 mousepads). • Once connected, follow the instructions presented in iCUE for how to customize your M75 WIRELESS.
Need help?
Do you have a question about the M75 and is the answer not in the manual?
Questions and answers