Corsair M55 RGB PRO - Ambidextrous Multi-Grip Gaming Mouse Manual

SETTING UP YOUR MOUSE

• Turn on your computer and connect the mouse to available USB 2.0 or USB 3.0 port on your computer.
• Download the iCUE software from www.corsair.com/downloads.
• Run the installer program and follow instructions for installation.

RIGHT-HANDED MODE (FACTORY DEFAULT)

In right-handed mode, the Right Forward and the Right Backward buttons are disabled.

HOW TO SWITCH TO RIGHT-HANDED MODE WITH iCUE

• Go to Settings and select M55 RGB PRO device icon.
• Turn off "Enable Left Handed Mode".

HOW TO SWITCH TO RIGHT-HANDED MODE WITHOUT iCUE

• Press and hold the Right Forward and the Right Backward buttons simultaneously for 5 seconds.
• DPI LED and logo LED will blink red 3 times.
• Release the buttons.

LEFT-HANDED MODE

In left-handed mode, the Left Forward and the Left Backward buttons are disabled.

HOW TO SWITCH TO LEFT-HANDED MODE WITH iCUE

• Go to Settings and select M55 RGB PRO device icon.
• Turn on "Enable Left Handed Mode".

HOW TO SWITCH TO LEFT-HANDED MODE WITHOUT iCUE

• Press and hold the Left Forward and the Left Backward buttons simultaneously for 5 seconds.
• DPI LED and logo LED will blink red 3 times.
• Release the buttons.

For use only with NRTL listed end product and Mouse Rating: 5V 100mA

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Changes or modifications not expressly approved by CORSAIR MEMORY, Inc could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference i n a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. > Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAN ICES-3(B)/NMB-3(B)