Bosch NDP-5533-Z30L User Manual
Hide thumbs
Also See for NDP-5533-Z30L:
- Security instructions (24 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch NDP-5533-Z30L
Summary of Contents for Bosch NDP-5533-Z30L
- Page 1 AUTODOME IP starlight 5100i IR NDP‑5533‑Z30L User manual...
-
Page 3: Table Of Contents
Picture Settings 7.2.3 Enhance 7.2.4 Scene Mode Scheduler Encoder Profile Encoder Streams Encoder Statistics Encoder Regions Privacy Masks Lens Settings PTZ Settings 7.10 Pre-positions and Tours 7.11 Pre-position settings 7.12 Sectors Bosch Security Systems User manual 2025-04 | 1.0 | DOC... - Page 4 Quality of Service 10.5 Multicast 10.6 IPv4 Filter Service 11.1 Maintenance 11.2 Licenses 11.3 Certificates 11.4 Logging 11.5 Diagnostics 11.6 System Overview Operation via the browser 12.1 Live page 12.1.1 Connection 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
-
Page 5: Autodome Ip Starlight 5100I Ir Table Of Contents | En
Searching for recorded video 12.2.3 Exporting recorded video 12.2.4 Track list 12.2.5 Controlling playback 12.3 Dashboard AUX Commands Troubleshooting 14.1 Rebooting the unit 14.2 Physical reset button 14.3 Customer Service and Support Support Bosch Security Systems User manual 2025-04 | 1.0 | DOC... -
Page 6: Safety
Legal Information Copyright This manual is the intellectual property of Bosch Security Systems, and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. -
Page 7: Important Safety Instructions
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. -
Page 8: Important Notices
RELATED FUNCTIONS OF THIS PRODUCT. FCC Supplier’s Declaration of Conformity Order number Identifying feature NDP-5523-Z30L | NDP-5533-Z30L PTZ 4MP HDR 30x IP66 pendant IR Compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following... -
Page 9: Important Notices - Illumination Safety
PoE: Use only approved PoE (802.3bt) devices. Power-over-Ethernet can be connected at the same time as a 24 VAC power supply. If auxiliary power (24 VAC) and PoE are applied simultaneously, the camera selects PoE and stops auxiliary input. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 10: Use Latest Software
Security advisories, that is a list of identified vulnerabilities and proposed solutions: https://www.boschsecurity.com/xc/en/support/product-security/security- advisories.html Bosch assumes no liability whatsoever for any damage caused by operating its products with outdated software components. Notice! Bosch strongly recommends upgrading to the latest firmware for the best possible functionality, compatibility, performance and security. -
Page 11: Introduction
You can also use the Project Assistant app to complete the initial configuration of the camera. In order to use this device with the Project Assistant app by Bosch, you must download the app from the BoschDownloadStore, from Google Play, or from the Apple Store. - Page 12 AUTODOME IP starlight 5100i IR – From www.boschsecurity.com, select Support > Apps and Tools > Online Apps - Video > Bosch Project Assistant app. Select the appropriate operating system, and then click the appropriate button to download and install the app. –...
-
Page 13: System Overview
Click this icon to configure the device. Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Logout Click this icon to log out of the device. Click this icon to get context-sensitive help for the page you are browsing. -
Page 14: Dashboard
The Dashboard page is used to display detailed information about the device. The Dashboard is only visible in the application bar if the Show 'Dashboard' option is enabled by a service-level user in the Configuration -> Web Interface -> Appearance page. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 15: General
A check mark in this check box indicates that at least one certificate is loaded onto the camera. If no certificates are loaded, then “No certificate installed” appears to the right of the text. The Escrypt certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –... -
Page 16: Date/Time
Enter the current time or click the Sync to PC button to copy your computer's system time to the camera. Note: It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 17 – Select TLS protocol if the server uses the RFC 5246 protocol. – Select Off to disable the time server. Click Set to apply the changes. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 18: Web Interface
The HTTP referrer check works as a protection against a CSRF (Cross-site request forgery) attack. If a use case requires not sending the HTTP referrer, you can disable this option. In this situation, you might require other mitigations against CSRF attacks. Login notification 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 19: Live' Functions
Select this checkbox if you want the alarm inputs to appear in the Digital I/O section of the Live page. Show alarm outputs Select this checkbox if you want the alarm outputs to appear in the Digital I/O section of the Live page. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... - Page 20 Enter the path for the storage location of individual images and video sequences saved from the Live page. Video file format Select a file format for the live page display. The MP4 format does not include metadata. 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
-
Page 21: Connectivity
Note: The fields that appear next depend on the option that you select in the field Type. IP address Enter the IP address of the server on which you wish to save the JPEG images. Login Enter the login ID for the server. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 22: Dyndns
To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. Click Set to apply the changes. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 23: Camera
Click Defaults to restore the factory defaults for the camera. A confirmation screen appears. Allow several seconds for the camera to optimize the picture after a reset. Click Confirm in each dialog box that opens to complete a factory reset of the device. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 24: Display Stamping
Enable this option to hide the logo's background. To place a logo on the image, select and upload an uncompressed .bmp file with a maximum size of 1024 x 1024 pixels and 16M colors to the camera. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 25 31 characters. Text color Select the color for the alarm message to be displayed in. Background color Select the background color for the alarm message to be displayed in. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
- Page 26 If you have enabled the Transparent background option, the background color is not displayed in the OSD. Transparent background Check this box to make transparent the stamp background on the image. 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
- Page 27 (live or saved) has been manipulated. If you want to add a digital signature to the transmitted video images to ensure their integrity, select one of the cryptographic algorithms for this signature. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 28: Positioning
The location of the camera on the ground on the Y-axis. Z [m] The elevation of the ground plane. To determine the elevation of the camera, add the Z [m] value and the Height [m] value of the camera. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 29: Scene Mode
IR illumination is required. Mode ID The name of the selected mode is displayed. Copy mode to Select the mode from the drop-down menu to which you wish to copy the active mode. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 30: Alc
This option is only available when Automatic exposure is selected. Select the Fixed shutter [s] for fixed exposure. (The values available depend on the value set for the ALC mode). 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 31: Picture Settings
Select the degree of color in the video image. The range of options is from -18° to 18°; the default is 0°. Brightness Adjust the brightness level with the slider. The default is 10. Contrast Adjust the contrast level with the slider. The default is 10. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... - Page 32 Color: The camera does not switch to Night Mode regardless of ambient light conditions. – Auto (default): The camera switches out of Night Mode after the ambient light level reaches a pre-defined threshold. 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
-
Page 33: Enhance
Adjust the level of sharpness of the video image (from 1 to 15) using the slider. Adjustments to the Sharpness level appear on the OSD. Temporal noise filtering Adjusts the Temporal noise filtering level between -15 and +15. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 34: Scene Mode Scheduler
Change the profiles only once you are fully familiar with all the configuration options. Note: In the default setting, Stream 1 is transmitted for alarm connections and automatic connections. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 35 (Minimum bit rate). Select the necessary bit rate optimization setting: – Off: bit rate optimization is disabled – Maximum quality – High quality – Medium – Low bit rate Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
- Page 36 The lower the quantization of the P- frame (QP value), the higher the encoding quality (and thus the best image quality) and the 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
-
Page 37: Encoder Streams
If you selected 2560x1440 (3.7 MP), the options for Stream 2 are: – Copy Stream 1 – 2560x1440 (3.7 MP) – 1920x1440 (cropped) – 1080p (2 MP) – 1536x864 (1.3 MP) Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 38: Encoder Statistics
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x). Averaging period Select the appropriate averaging period as a means of stabilizing the long term bit rate. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 39: Encoder Regions
In other words, the color of the Privacy mask is the most prevalent of the three (Black, White, or Gray) in the background scene that the Privacy mask covers. Privacy mask Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 40: Lens Settings
Determines the behavior of the camera when the control for the camera is inactive. Select a time period from the pull-down list (3 s - 24 h). The default setting is 30 seconds. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 41 Sets the upper tilt limit of the camera. Use the preview window to move the camera to the tilt limit and click the button. Tour A / Tour B Starts and stops the recording of a recorded (guard) tour. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 42: Pre-Positions And Tours
Click the button Add pre-position (“+”) to define the pre-position. Select a number for the pre-position, from 1 to 256. Type an optional name for the pre-position, up to 20 characters long. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 43 Type 7 in the input box and click AUX on. To stop the tour, type 7 and click AUX off. Sequence settings White light (marked with #) Select this checkbox to include white light in the scene. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 44: Pre-Position Settings
Enter a number between 0000 and 9999, inclusive, to identify the camera. 7.14 Illumination/Wiper IR illumination IR mode Select On to operate the IR illuminator. Select Off to stop the IR illuminator. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 45: Audio
Select a format for audio recording. The default value is 48 kbps. You can select 80 kbps, G.711 or L16 depending on the required audio quality or sampling rate. AAC audio technology is licensed by Fraunhofer IIS. (http://www.iis.fraunhofer.de/amm/) Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 46: Pixel Counter
To change the shape of a zone, place the cursor over the edge of the zone, hold down the mouse button and drag the edge of the zone to the required position. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 47: Recording
The Storage overview field displays the local media. Note: The recording performance of the SD card depends on the speed (class) and the performance of the SD card. Bosch recommends an SD card of Class 6 or higher. Bosch Security Systems 2025-04 | 1.0 | DOC... -
Page 48: Activating And Configuring Storage Media
– If you change a profile’s settings, click Set to save. – If necessary, click Default to return all settings to their factory defaults. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 49 Check the encoding interval and bit rates from profile: box and select an encoder profile to set the associated encoding interval for alarm recording. Check the Export to account box to send standard H.264 or H.265 files to the target whose address is displayed. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 50: Maximum Retention Time
These will later be displayed as a single entry in the table. Click OK to accept the selection. The window will close. Assign the individual holidays to the recording profiles, as described above. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 51: Recording Status
Options are: – 256 x 144 – 512 x 288 – 768 x 432 – 1280 x 720 – 1536 x 864 – 1920 x 1080 Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 52: Sd Card Status
SD Card Status This section identifies the following details about the SD card installed in the camera: – Manufacturer – Product – Size – Lifespan Check – Lifespan – Lifespan alarm 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 53: Alarm
Setting destination 10 to the IP-address 0.0.0.0 overrides its function as the tenth address to try. Video transmission If the unit is operated behind a firewall, select TCP (HTTP port) as the transfer protocol. For use in a local network, select UDP. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 54: Video Content Analysis (Vca)
Video Content Analysis (VCA), available on the product page for Intelligent Video Analytics. Access the product page on the online product catalog through the appropriate link from https://www.boschsecurity.com/xc/en/product- catalog/. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 55 A separate Help file provides information about configuring for the VCA settings. Note: Full VCA configuration and Help is only available on the web browser when MPEG ActiveX software from Bosch is installed on your computer. MPEG ActiveX software is available from the Bosch Security Systems DownloadStore (https:// downloadstore.boschsecurity.com/)
- Page 56 This avoids false alarms triggered by short-term changes, for example, cleaning activities in the direct field of vision of the camera. 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
-
Page 57: Audio Alarm
You can exclude particular signal ranges in order to avoid false alarms. For this reason the total signal is divided into 13 tonal ranges (mel scale). Check or uncheck the boxes below the graphic to include or exclude individual ranges. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 58: Alarm E-Mail
256 x 144 – 512 x 288 – 768 x 432 – 1280 x 720 – 1536 x 864 – 1920 x 1080 – 2560 x 1440 – Resource based 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 59: Alarm Inputs
Special characters are not supported by the system's internal management. Note: This name appears in the Digital I/O section of the Live page. Action Select a type of action to be performed when an alarm input occurs: – None Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 60: Alarm Outputs
LIVE page. The physical input connection can be activated by dry contact devices such as pressure pads, door contacts, and similar devices. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 61 80: Digital zoom Output if Input is “Time range”. Scene 1 Scene 2 Click the checkbox Enabled to activate the alarm. Click Set to save. The camera’s system activates the alarm rules. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 62: Network
Consult the network administrator for valid IPv6 address construction. Automatic address If you have set up your network to use automatically assigned IP addresses, the assigned address is displayed here for information. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 63 You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Encryption). Minimum TLS version Select the version for minimum Transport Layer Security (TLS). Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 64: Advanced
Enter the password that is stored in the RADIUS server. Certificates [EAP-TLS] If any certificates are already uploaded at the client level or at the server level, they show here. Click Configure. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 65: Network Management
Control, and the Alarm video settings, and to select the appropriate Post-alarm time. Post-alarm time has a time period from 0 s [seconds] to 3 h [hours]; 15 s [seconds] is the default option. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 66: Snmp = Snmp V1 Legacy
The settings must be made individually for each stream. Enter a dedicated multicast address and port for each stream. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 67: Ipv4 Filter
IP Address 1 / 2 Enter the IPv4 address that you want to allow or block Mask 1 / 2 Enter the subnet mask for the appropriate IPv4 address. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 68: Service
Notice! Potential loss of data Bosch recommends that you save all device configurations, including IVA and calibration, on your network before starting a firmware update. Notice! Before starting a firmware update, make sure to select the correct upload file. -
Page 69: Licenses
For the other items, a counter is maintained. Click the button Start self-test to show the number of times that the camera: – performed a homing event. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 70: System Overview
This window is for information only and cannot be modified. Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 71: Operation Via The Browser
Click (Iris open) to open the iris. Note: When you close or open the iris, ALC level will be adjusted simultaneously. Focus Click to focus near. Click to focus far. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 72: Pre-Positions
The alarm output allows the operation of an external device (for example, a light or a door opener). – To activate the output, click the checkmark symbol. – The symbol lights when the output is activated. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 73: Special Functions
The icon lights up and displays a moving graphic to indicate a running recording. If no recording is taking place, a static icon is displayed. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 74: Date And Time
Audio can be sent and received via the Live page if the unit and the computer support audio. Press and hold the F12 key on the keyboard to send an audio signal to the unit. Release the key to stop sending audio. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 75: Storage, Cpu And Network Status
Watermark invalid Indicates that the watermark is not valid. Motion alarm Indicates that a motion alarm has occurred. Storage discovery Indicates that recorded video is being retrieved. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 76: Playback
The time bar offers various options for navigation in and between sequences. – If required, click in the bar at the point in time at which the playback should begin. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... -
Page 77: Dashboard
You can also download a .JSON file with information about the device: Click the Export button at the bottom of the page Select a location in your hard drive to store the file Bosch Security Systems 2025-04 | 1.0 | DOC User manual... -
Page 78: Aux Commands
Toggle Turbo mode On/Off Adjust Proportional speed AUX on, entered repeatedly, cycles control through increasing speeds Super slow, Slow, Medium, and Fast. AUX off decreases speeds through the same settings. 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 79 AUTODOME IP starlight 5100i IR AUX Commands | en Function Command Notes On/Off Mask Calibration Procedure 1-256 Set/- Pre-position Programming 1-256 -/Shot Pre-position Recall Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 80: Troubleshooting
- Check the integrity of all connectors and splices of the Cat5e/Cat6 shielded Ethernet cable. If O.K., then: - Contact Bosch Technical Support. Camera moves when attempting to - Check that the camera’s IP address is properly set. move other cameras. - Page 81 Turn on backlight compensation. subject. Configuration or video management The model ID may be corrupt. software identifies the unit as Complete the steps in the section Rebooting the unit, “Videojet Generic”. page 82. Bosch Security Systems 2025-04 | 1.0 | DOC User manual...
-
Page 82: Rebooting The Unit
If you cannot control the unit after the firmware upgrade, then cycle the power to the unit. If a power reset does not solve the problem, or if Configuration or video management software identifies the unit as “Videojet Generic,” then contact your Bosch Service Center for an RMA for the unit. -
Page 83: Physical Reset Button
For AUTODOME IP 5000i IR │ AUTODOME IP starlight 5000i IR │ AUTODOME IP starlight 5100i IR models, the reset button is near the SD card slot. To access the reset button, remove the metal cover installed on the back of the camera. Bosch Security Systems 2025-04 | 1.0 | DOC User manual... - Page 84 | Troubleshooting AUTODOME IP starlight 5100i IR 2025-04 | 1.0 | DOC Bosch Security Systems User manual...
-
Page 85: Customer Service And Support
AUTODOME IP starlight 5100i IR Troubleshooting | en 14.3 Customer Service and Support If this unit needs service or if you need technical support, contact Bosch Security Systems Technical Support for instructions. USA and Canada Telephone: 800-289-0096, option 4 Fax: 800-315-0470 Email: technical.support@us.bosch.com... -
Page 86: Support
Troubleshooting – Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2025-04 | 1.0 | DOC Bosch Security Systems User manual... - Page 88 Building solutions for a better life 202504082305...
Need help?
Do you have a question about the NDP-5533-Z30L and is the answer not in the manual?
Questions and answers