Hyundai Genesis Manual

Functional introduction

System components
Headunit
The headunit is located in the vehicle dashboard.

1. Press :Switching off /on
   Turn :Setting the volume
2. Disc slot
3. Ejecting a disc
4. Loading a disc

Display
The display is located in the vehicle dashboard. It does not have any controls.

1. Front display

Central control panel
The central control panel is located in the front in the vehicle center console. It comprises the controller and the main function buttons.

1. Main function buttons
2. Controller

Controller functions
You can push, turn and press the controller .
Pushing the controller

• Push : Switching between the areas in a main menu.
• Push : Scrolling through a list page by page, or selecting a menu item
• Push : Moving the map

Turning the controller
Turn to the left or right : Selecting a menu item

Pressing the controller
Press : Confirming the selection

Main function buttons

1. 
   Switching to FM or AM mode and switching radio band
2. 
   Short press: Going back one menu level
   Long press: Opening the main menu for the active main function
3. • Calling up the map display and switching to navigation mode
   • Repeating an audible driving recommendation

4. 
   Opening the Navigation main menu
5. • Opening the Info main menu
   • Opening the Phone main menu
6. • Switching to disc mode
   • During video playback, press and hold until the Disc main menu appears.
   • Switching to AUX mode (e.g. iPod, USB stick) and opening the AUX main menu
   • Press .
7. 
   Switching to XM ® Satellite Radio mode.

Function buttons on the steering wheel

1. and

• Tuning to a station via the presets or via a search (FM or AM)
• Tuning to a channel via the channel list (XM ^®
  Satellite Radio)
• Selecting discs
• Fast forwarding/ reversing: USB memory stick, iPod ^®
• Skipping chapters forward/back: video DVD
• Skipping tracks forward/back: Audio disc, Video CD, iPod ^® , USB

2. and
   Setting the volume

• Switching mode
• Switching private mode on/off (phone)
• Switching audio/video playback on/off

4. 
   Activating/deactivating the voice control system

• Opening the Phone main menu
• Using redial
• Accepting/rejecting an incoming call
• Ending a call
• Swapping between two calls

Basic operations
Selecting a menu item

• Turn or push until the desired menu item is highlighted.
• To confirm a selection:
  Press.

Opening the Options menu

• With the content area active (blue frame around), push once . You can now select and confirm further menu items.

Switching between the areas

• Push repeatedly .

Scrolling through a list page by page

• Push repeatedly .

Closing a menu

• Push once , or press .

Main menu, content area and Options menu

1. Main menu
2. Content area (blue frame = menu is active)
3. Selected menu item in the content area
4. : Options menu is available
5. : currently selected station

1. Main menu
2. Top status line
3. Content area
4. Options menu
5. Highlighted menu item in the Options menu
6. Bottom status line

Top status line

1. Currently active main function
2. Currently active entertainment source
3. Preset of the currently selected station in the presets
4. Frequency of the currently selected station
5. Indicator for stereo reception

1. Scale for the fader setting
2. Fader indicator
3. Balance indicator
4. Scale for the balance setting

All menus must have "HD Seek & Scan", "HD off" and "RDS off"

Audio settings
Opening the Audio Settings menu

• In a main menu (here Disc), select Settings.
• If an audio/video selection menu is displayed, select Audio.

Setting the balance/fader

• In the Audio Settings menu, select Balance/ Fader.
• To switch between Balance and Fader, press .
  The previously inactive function is now active.
• To set a value:
  Turn until the desired setting is reached.
  The system saves the setting automatically.

Setting the treble/mid/bass

• In the Audio Settings menu, select Treble/Mid/ Bass . The Treble/Mid/Bass menu is displayed in the content area.
• Activating a scale: Press or push repeatedly until the desired scale is active.
• To set a value: Turn until the desired setting is reached. The indicator moves accordingly on the scale, showing you the setting.

1. Scale for the treble setting
2. Scale for the mid setting
3. Scale for the bass setting
4. Treble indicator
5. Mid indicator
6. Bass indicator

1. Highlighted menu item
2. : currently active preset
3. : currently inactive preset

1. Status display
2. Menu item Surround

Setting the equalizer

• In the Audio Settings menu, select EQ Presets .
  In the content area, the Equalizer menu is displayed.
• To activate a preset: Select the desired preset.
  The Equalizer menu is automatically closed after a short time.

Switching surround on/off

• In the Audio Settings menu, select Surround .
  Depending on the previous status, the function will be switched on or off.
  = function switched off
  = function switched on

Screenshot is needed, the first channel in the presets must be highlighted and tuned.

1. Preset number of the currently tuned channel
2. : currently tuned channel

Screenshot is needed, menu item "Details" must be highlighted.

1. Options menu
2. Menu item Details

Tuning to channels

• Press .
• Select Presets .
• To tune to a channel: Select the desired channel in the presets.
• To show details of the currently tuned channel: Highlight the currently tuned channel in the presets.
• Push once .
  The Options menu appears.
• Select Details .
  You will see the details screen.

Tuning to a channel via the Scan function

• Press .
• Select Presets .
  The presets appear.
• To open the Options menu: In the presets push once .
  The Options menu appears.
• To start the Scan function: Select Scan .
• To stop the Scan function manually: Press .

Picture has the same content as the one, middle column

1. Presets

Tuning to a channel via the channel list

• Press .
• Select Channel List .
  The channel list appears.
• To tune to a channel: Select the desired channel in the channel list.
• To show details of the currently tuned channel: Highlight the currently tuned channel in the channel list.
• Push once .
  The Options menu appears.
• Press .
  You will see the details screen.

Tuning to a channel via the category list

• Press .
• Select Category List .
  The category list appears.

First category in list be highlighted.

1. Category list

• Select the desired category.
  A channel list appears.
• Select the desired channel.
• To show details of the currently tuned channel: Highlight the currently tuned channel in the channel list.
• Push once .
• In the Options menu, press .

Tuning to a channel via channel number input

• Press .
• Select Direct Tune .
  The number of the currently tuned channel is displayed.
• To enter the digits: Turn until the desired digit is displayed.
• After that, press .
  After entering three digits in this way, the system tunes to the corresponding channel.

1. 3 Digits of the channel number (first is highlighted)

4. Channel related information

Storing channels

• Tune to a desired channel
• In the XM^® Satellite Radio main menu, select Presets.
  The presets appear.
• To select a preset: Turn until the desired preset number is highlighted.
• To store the currently tuned station in the selected preset: Press and hold until the station is stored.

Tuned channel must not be stored in the presets. All channel memories must be occupied. The sixth station must be highlighted, see example picture below from the FM/AM chapter.

1. Currently tuned channel
2. : currently tuned channel

It must match with screenshot above

1. Options menu

Menu item "XM Radio" must be highlighted

Menu item "Display by CH number" must be highlighted .

1. XM ® Radio settings menu

Settings
The XM ® Radio settings include the following functions:

• Setting the display in the upper status line
• Setting the category filter for the channel list
• Showing the Radio ID number

Opening the XM ® Radio settings menu

• Press .
• Select Settings .
  The Settings menu appears.
• Select XM Radio.
  The XM ® Radio settings menu appears.

Disc mode

Loading/ejecting a disc
The Driver Information System features a built-in disc changer magazine with six compartments.

Loading a disc

• Briefly press .
  The system will prompt you to insert a disc with the message Please insert Disc.
• Insert a disc into the slot.

Ejecting the last disc played

• Briefly press .
  The system will eject the disc last played.
• Remove the disc from the slot.

1. Press :Switching off /on
   Turn :Setting the volume
2. Disc slot
3. Ejecting a disc
4. Loading a disc

1. Occupied magazine compartments
2. Disc main menu
3. Empty magazine compartments

1. Mode display
2. Disc main menu with list of discs
3. Disc icon
4. Track currently playing
5. Track list of the disc currently playing (MP3: or folder list)
6. Name of the disc currently playing
7. : track currently playing (MP3: or current folder)
8. Disc currently playing
9. Icon for the disc
10. : disc currently playing

Audio disc playback
Opening the Disc main menu
At least one disc must be loaded.

• Press once or twice until the Disc main menu appears.

Selecting and playing discs

• Select an audio disc in the list of discs in the Disc main menu.

Pausing or resuming playback

• In the Disc main menu, highlight the track currently playing and press .
  The system will pause or resume playback, depending on the previous status.
  = pause
  = play

Fast forwarding/reversing

• In the Disc main menu, highlight any track and push once .
• To start forwarding/ reversing: Select FF or REW . Then press and hold .
• To terminate forwarding/ reversing: Release .

Repeating tracks or folders

• Highlight the desired track or folder.
  Push once .
• Select Repeat Track or Repeat Folder .
  = function switched off
  = function switched on

1. Options menu

1. Folder
2. Highlighted track
3. Track

1. Highlighted track currently playing.

1. Status display
2. Options menu

Random play
Switching random play of all tracks on/off

• Highlight the track currently playing.
• Push once .
• Select Random Disc .
  = function switched off
  = function switched on

Scan function

• Highlight the track from which you want the function to start.
• Push once .
• Select Scan .

Video DVD playback
Switching to disc mode and starting video DVD playback
At least one DVD must be loaded.

• Press once or twice until the Disc main menu appears.
• To play a disc: Select a video DVD in the Disc main menu.

Opening Disc main menu during video playback

• Press and hold until the Disc main menu appears.
• To return to the video fullscreen display:
  Press .

Opening the native DVD menu

• During video playback, press .
  The native DVD menu appears.

1. Mode display
2. Disc main menu with list of discs
3. Disc icon
4. Chapter currently playing
5. Content area with native DVD menu
6. Name of the disc currently playing
7. Open the Settings menu
8. Disc currently playing
9. Icon for a video DVD
10. : disc currently playing

1. Selection menu

1. Video settings menu

Audio and Video Settings

• In the Disc main menu, select Settings.
  An audio/video selection menu appears with the following menu items:
  • Audio
  • Video
    In the Video Settings menu, you can select Aspect Ratio, Brightness, Color, Contrast or Reset Video Settings.
  • Menu Language .

• Call the desired function and turn until the desired setting is reached.
  The system saves this setting automatically.
• To close a menu: Press , or press .

Native DVD menu
The native DVD menu includes the following functions:

• Returning to video fullscreen display
• DVD top menu/DVD menu which is part of the DVD itself.
• Chapter list
• Selecting titles On-screen menu
• Switching audio track
• Switching viewing angle

Example: Selecting titles

• In the native DVD menu, select Title List .
  The title list appears.
• Select the desired title or movie.

1. Native DVD menu

1. Icon for chapter currently playing

1. Icon for title currently playing

Depending on the content of the DVD currently playing, certain menu items may have no function even though they are displayed.

1. Pause/resume playback
2. Skip chapter back
3. Skip chapter forward
4. Open the native DVD menu
5. Close the on-screen menu
6. Call up the chapter list
7. Fast reverse
8. Fast forward
9. Shows the selected menu item -

On-screen menu

• During video playback, press .
  The on-screen menu will be shown over the video currently playing.

Pausing or resuming playback

• Select .
  The system will pause or resume playback, depending on the previous status.

Skippping chapters forward/back

• Select or .
  The chapter list will be shown over the video currently playing.

Fast forwarding/reversing

• Select or , then press and hold .
• To terminate fast forwarding/reversing, release .

AUX mode

Connecting a device

Connecting an iPod ®

• Connect an iPod ®.
  Playback will start with the first track in the "Songs" category.

Connecting an USB

• Connect an USB memory stick containing audio files.
  Open the AUX main menu and, if necessary, select the USB stick as the signal source.
  Starting playback.

Connecting an AUX source

• Connect an AUX (audio/ video) signal source.
• If necessary, select the desired signal source in the AUX main menu.
• Start playback on the AUX signal source.

1. 3,5 mm (0.14") jack socket
2. USB socket

1. Mode display
2. AUX main menu with list of signal sources
3. AUX icon
4. Track currently playing
5. Content area with track list (Blue frame = area active)
6. Name of the album currently playing
7. Play icon for the track currently playing

AUX and iPod ® menu
Opening the AUX main menu

• Press once or twice until the AUX main menu appears.

Opening/closing the AUX main menu during playback

• To show the AUX main menu: Press .
• To show the AUX full-screen display: Press .

Opening the iPod ® menu

• Push until the content area is active (blue frame).
• Press repeatedly until the iPod ® menu appears.

iPod ® and USB functions
Navigating within the iPod ® menu and selecting a track

• Forward: Select a menu item in the iPod ® menu.
• Backwards: Press .
  Select the desired track.

Navigating within the USB menu and selecting a track

• Select the desired folder.
  You will see the tracks stored in this folder.
• To play a track: Select the desired track.
• To switch to the next folder level up: Select .

1. iPod ® menu

1. Menu item for the folder change function
2. Folder
3. Icon for track currently playing
4. Track
5. Highlighted track

1. Mode display
2. AUX main menu with list of signal sources
3. Aux icon
4. Track currently playing
5. AUX content area with track/ folder list
6. Name of the currently active folder
7. Play icon for the track currently playing

1. Options menu

Pausing or resuming playback

• Highlight the track currently playing and press .
  The play icon or the pause icon shows the corresponding status.

Fast forwarding/reversing

• Highlight any track and push once .
• To start forwarding/ reversing: Select FF or REW . Then press and hold .
• To terminate forwarding/ reversing: Release .

Skipping tracks forward/back

• On the steering wheel, briefly press or .

Repeating tracks or folders
Repeating folders is only available for USB.

• In the USB or iPod ® menu, highlight the desired track or folder and push once .
• To switch the function on/ off: In the Options menu, select Repeat Track or Repeat Folder .
  = function switched off
  = function switched on

1. Folder
2. Highlighted track
3. Track

1. Status display
2. Options menu

1. Play icon for track currently playing

1. Highlighted folder

Scan function (only USB)

• Highlight the track from which you want the function to start.
• To open the Options menu: Push once .
• To switch the function on/ off: In the Options menu, select Scan .

Random play (only USB)

• Random play of all tracks: Highlight the track currently playing.
• Random play within a specific folder: Highlight the desired folder.
• Push once .
• In the Options menu, select Random Disc or Random Folder .
  = function switched off
  = function switched on

Phone

Pairing a mobile phone
A precondition for pairing and connecting is that Bluetooth^® is activated on the mobile phone.

• Press until the Phone main menu appears.
• Select Connect Phone.
  The device list appears. Select Pair Phone.
  The Bluetooth^® name of the Driver Information System is GENESIS, it is displayed under this name on the mobile phone.
• Start pairing on the mobile phone. When prompted, enter the passkey "1234".
  The system will start the process of connecting with the mobile phone.
  = No connection
  = A mobile phone is connected

1. Icon = Mobile phone is paired with the system and currently connected
2. Icon = Mobile phone is paired with the system, but not currently connected
3. Phone name
4. Device list
5. Icon for the connection status

1. Bluetooth name of the Driver Information System
2. Passkey
3. Remaining time for entry of the passkey

1. Phone main menu

Connecting a mobile phone
After the system is switched on, it automatically attempts to reconnect with the last mobile phone connected. The following conditions must be met for this:

• The mobile phone is switched on and is within the reception range of the system.
• The mobile phone is still paired with the system.
• Bluetooth^® is activated on the mobile phone.
• In the Settings menu, Bluetooth Autoconnect is activated =

Opening the Phone main menu

• Press once or twice until the Phone main menu appears.

Initiating/canceling a call
Entering a phone number

• Open the Phone main menu.
• Select Dial Number.
  The input menu appears. This has two user-control areas: The area with the predictive speller and the area with , and .
• To move from one area to another: Push .
• To enter a number: In the predictive speller, highlight a digit by turning and press .
  The digit is entered and appears in input field .
• To initiate a call: From the predictive speller, push and select CALL.
• To cancel a call: Press .

1. Input field
2. Predictive speller
3. Enlarged display of the currently highlighted character in the predictive speller
4. Initiate a call
5. Store number in the phonebook
6. Delete individual digits
7. Delete a complete entry
8. Currently highlighted character

1. Menu item END
2. Display during a call

Using call lists

• In the Phone main menu, select one of Missed Calls Received Calls or Dialed Numbers .
  The appropriate call list appears.
• To initiate a call: Select the desired entry in the call list.

Accepting/rejecting an incoming call
The call menu is displayed when there is a call incoming.

• Select Accept or Reject .
  When you accept the call you conduct it over the hands-free unit.

Ending a call
In the call menu, select END

Phonebook
Calling up the phonebook

• In the Phone main menu, select Phone Book .
  The phonebook appears.

The following functions are now available:

• Creating a new entry
• Editing an entry
• Searching for an entry
• Displaying details on an entry
• Initiating a call to an entry
• Deleting an entry

1. Search for an entry
2. Maximum number of entries
3. Existing entries
4. Create a new entry

Navigation

1. Hit list
2. Input field
3. Currently highlighted character
4. Number of hits in the hit list
5. Predictive speller
6. Confirm entry
7. Delete a complete entry
8. Delete individual characters
9. Enlarged display of the currently highlighted character in the predictive speller

Entering destinations
Entering a destination via the address and street number

• In the Navigation main menu, select Destination .
  A selection list appears.
• Select Address .
  The address input menu appears. Enter now all address categories (state, street, city, etc.) successively.
• To enter a character: In the predictive speller, highlight a character and press .
  The character is entered and appears in the input field.
• To delete characters: Select or .
• To complete an entry: If OK is highlighted, press .
• If prompted, select an entry in the hit list .

Entering a POI destination 1
The following example selects a POI destination via a vicinity search.

Opening the POI menu

• Press .
• Press .
  The Options menu appears.
• Select Display POI Icons.
  The POI menu appears.
• Activate or deactivate POI categories.
  = category deactivated
  = category activated
• Press .

Selecting a POI in the POI list

• Select Show POI List .
  A selection list appears.
• Select a POI in the list.

POIs (Points Of Interest) include petrol stations, restaurants and banks, for example.

Screenshot needed as shown below. "Name" must be highlighted.

1. POI main menu

1. POI categories already activated
2. POI menu

Screenshot needed as top on the right.
A name must not be entered

1. Input progress display
2. Hit list (empty if no name has been entered)
3. Input field
4. Predictive speller
5. Menu item for setting a category/city filter
6. Delete a complete entry
7. Menu item for entering the state/province

1. POI list
2. POI with sub entries (number of sub entries)

Entering a POI destination 2
The following example enters a destination via POI name.

• In the Navigation main menu, select Destination
  A selection list appears.
• In the selection list, select Point of Interest .
  The POI main menu appears.
• Select Name .
  The POI name input menu appears.
  Push and select State/Province .
• Enter a state/province as with entering an address.
• Enter a POI name and push to complete it.
  You will see the POI list.
• Select an entry in the list.

Entering the destination via the destination memory

• In the Navigation main menu, select Destination .
• Select Address Book .
  The Address Book appears.
• Select one of the following destination memory categories:
  • Home , Work , Favourite Point 1 , Favourite Point 2 Favourite Point 3 , Favorite Point 4
  • Address List
    If a category does not yet contain at least 1 destination, then that respective category cannot be selected.
• Select a list entry.

Entering the destination via a map
Calling up the map

• Press .
  The map appears.

Selecting the destination in the map

• Keep moving the map until the desired destination is in the crosshairs.
• To confirm the selection: Press .
  You may be prompted to confirm that you wish to accept the destination.
• To confirm the destination: Select Yes .

1. Current time
2. Next interchanges to drive in and out
3. Route information
4. Options menu
5. Destination (Icon )
6. Waypoints (Icons )
7. Interchanges (Icons )
8. Distance and direction to the destination
9. Estimated time of arrival
10. Start (Icon )
11. Route

After entering the destination
Route calculation
After the destination entry has been confirmed, route calculation starts.

Options menu
The following functions are available in the Options menu:

• Start Guidance manually
• Multiple Route : for calculating alternative routes
• Route Info
• Virtual Travel for simulating the journey
• Change Route : for adding and changing waypoints

During route guidance
Route and route guidance options

• Press .
  The map display appears.
• Press .
  The Options menu appears.

Suspending/resuming route guidance

• Select Suspend Guidance or Resume Guidance.

Changing the route

• Select Reroute.
  The Route menu appears,
  = current active route.
• Select one of the alternative routes.
  The system calculates the new route.

Waypoints
Opening the waypoint menu

• In the Navigation main menu, select Change Route .
  The Waypoint menu appears. The following functions now are available:
  • Add Waypoint
  • Change Route for changing the order of the destinations
  • Show on Map for showing destinations in the map
  • Delete or Delete All for deleting waypoints or main destinations
  • Reroute for blocking a route section

Blocking a route section
The system calculates a detour route if possible.

• In the Options menu, select Reroute .
• Select one of the following menu items:
  • Detour 2 km
  • Detour 5 km
  • Detour 10 km

1. Main destination (Icon )
2. Waypoints (Icons )

Audible driving recommendations

• Press and hold until the Navigation main menu appears.
• Select Settings .
• Select Voice Guidance .

Setting the volume

• Select Adjust Volume .
• Turn until the desired setting is reached.
  The system saves this setting automatically.

Muting

• Select Mute Voice Guidance .

Repeating a recommendation

• Press .

Destination memory
Entering a destination and saving it
Selecting a destination memory category

• In the Navigation main menu, select Ed Address Book.
• Select one of the menu items:
  • Set Home, Set Work, Set Favourite Point 1, Set Favourite Point 2, Set Favourite Point 3. or Set Favorite Point 4. or
  • Address List followed by Add Address

Options for entering or selecting a destination

• Address
• Phone Number
• POI Name Search (nationwide) Facility
• GEO Data
• Previous Start Point , Previous Destinations or Marked Points
  (all the destinations already saved in the destination memory)
• MAP

Saving the destination

• In the Options menu, select one of Set Home, Set Work, Set Favourite Point 1, Set Favourite Point 2, Set Favourite Point 3, Set Favorite Point 4 or Add Address.
  The destination is saved.

Example of setting function: Displaying navigation information

• Select Navi Information .
  Adequate GPS reception must be available for the displays and .

1. Current vehicle speed
2. Geo-coordinates of the current vehicle position
3. Current vehicle position in metres above sea level
4. GPS reception quality
5. Version number of the digital map

Settings menu

• In the Navigation main menu, select Settings .
• The Settings menu appears.
  You can access the following setting functions:
  • Setting the volume of the audible driving recommendations
  • Map display settings Traffic information settings
  • Estimated time of arrival settings
  • Avoid Area settings
  • Displaying navigation information
  • Reset function
• To close the Information menu: Press .

Map functions
Calling up the map display

• Press .
  The map display appears.
• Press .
  The Options menu appears.
• Select Map View .
  The Map Main Settings menu appears.

Switching the map orientation
The map is oriented to the north or the direction of travel.

• Select North Up View or Heading Up .

Map display settings

• In the Navigation main menu, select Settings .
• Select Map Display .
  A list appears in which you can activate, deactivate and switch various functions.

1. Currently set map orientation
2. Current time
3. Distance/direction indicator
4. Audible driving recommendations are muted
5. Current vehicle position
6. Voice control system is active
7. Estimated time of arrival
8. Display for GPS reception (blue lettering = reception is o.k.)

1. Information on the crosshairs position
2. Crosshairs
3. Current vehicle position
4. Distance and direction as the crow flies from vehicle position to crosshairs position
5. Currently set map scale

Information on the current vehicle position

• Press .
  You will see an information display at the top, if the digital map contains corresponding data.

Moving the map/setting the map scale

• To activate scroll mode: Push or .
  If the map was previously in position mode, it will switch to scroll mode and you will see a crosshairs.
• To move the map: Push and hold or .
  The map moves accordingly.
• To set the map scale: Turn until the desired scale is reached.
• To set the map to the vehicle position: Press .
  The crosshairs disappear. The map is automatically set to the current vehicle position and is in position mode.

Voice control

General information
Operating language
The voice control system can be operated in English language no matter, which system language is set in the System settings.

Help function (teleprompter)
The help function comprises an acoustic help component and a visual help component, also called teleprompter. The help function can be activated at any time using the command "Help", or it is automatically activated as soon as the system does not receive a proper a voice input

Example FM/AM
Calling the FM or AM tuner

• Press on the steering wheel and say " Radio on after the signal tone.
  The FM or AM main menu appears on the display. The last selected station is played.

Tuner mode help

• Calling the tuner mode help: Press on the steering wheel and say " Radio commands " after the signal tone.
  The teleprompter is opened. You hear all the commands available for FM, AM or XM ® tuner mode.

Example Phone
Calling up phone mode
Phone commands can be used only while a Bluetooth ® mobile phone is connected to the system

• Press and say " Phone on " after the signal tone.
  The Phone mode main menu appears on the display.
  

Dialing a number

• Say " Dial number " to dial a phone number.
• Use the numbers "zero" to "nine" to enter the number.

Operating picklists
The voice control system can display picklists to you on the screen, for example the channel list in the XM^® tuner mode.

Scrolling through a picklist
You can scroll through any picklist using the commands
"Next page", "Previous page", "Back", "First Page" or "Last Page".

Selecting an entry in a picklist
Within picklists, you have the following two options for selecting an entry:

• Say the contents as they are displayed in the row.
  or
• Say "Entry...(1-8)".

Command overview
Group commands (Help)
For the help function
"Help"

For the main functions
"Main commands"

For tuner mode
"Radio commands"
"Station commands"
"Waveband commands"
"Frequency commands"

For disc mode
"Disc commands"
"Select disc commands"
"Folder commands" "Track commands"

For phone mode
"Phone commands"
"Number commands"
"Phonebook commands"

For navigation mode
"Navigation commands"
"Adressbook commands"
"Destination search commands"
"Route guidance commands"
"Map commands"

Storing
"Save current position"

Mode commands
"Radio on"
"XM Radio on" "Disc on"
"Phone on"
"Navigation on"

Tuner commands
Wave band selection
"FM"
"AM"

Station selection (FM,AM)
"Next station"
"Previous station"
"Seek up"
"Seek down"

Frequency selection (FM, AM)
"FM...(87.7-107.9)" "AM...(530-1710)"

Channel selection (XM^®)
"Next channel"
"Previous channel" "Channel...*
"Channel...(1-X)"
"Channel by name"

Disc commands
Disc selection
"Next disc"
"Previous disc"
"Disc by number"
"Disc...(1-6)"

Folder selection
"Next folder"
"Previous folder"

Track selection
"Next track"
"Previous track"
"Track by number" "Track...(1-99)"

Phone commands
Dialing
"Dial number"
"Redial"

Storing
"Store number"

Calling
"Call by name"

Navigation commands
Destination entering
"Enter state"
"Enter province" "Enter city"
"Enter address"
"Phone number search"

Destination memory
"Navigate home"
"Navigate work"
"Navigate to favorite point 1"
"Navigate to favorite point 2"
"Navigate to favorite point 3"
"Navigate to favorite point 4"
"Navigate to previous destination"

Route guidance
"Start route guidance" "Stop route guidance"
"Reroute"
"Reroute shortest distance"
"Reroute minimize freeway"
"Reroute minimize toll road"
"Reroute shortest time"
"Detour"
"Detour 1 mile" or "Detour 1 kilometer"
"Detour 2 miles" or "Detour 2 kilometer"
"Detour 5 miles" or "Detour 5 kilometer" "Detour 10 miles" or "Detour 10 kilometer"
The usage of "miles" or "kilometer" depends on the system language setting.

Navigation announcements
"Guidance voice off" "Guidance voice on"

Map
"Map on"
"Map zoom in"
"Map zoom out"
"Max zoom"
"Display route"
"Map north up"
"Map heading up"

Info main menu

• Press once or twice until the Info main menu appears.

Available submenus and functions

• Climate: shows information such as exterior temperature or the fan setting.
• Trip Info: shows information such as the distance covered and the average speed.
• Vehicle Height: shows the current vehicle height setting.
• Suspension Info: shows the suspension hardness setting.
• Car Settings: include information like Auto Door Lock or Key Activate Alarm.
• System Settings: include information such as Language or LCD Brightness