Micro Matic Pro-Line MMPP4301-EP Service Manual page 7

MODEL
Type
BTUs**
Compressor HP
Glycol Pumps
Pump Type
Pump GPH
Pump Motor HP
Pump Inlet/Outlet Barbs
Plug Type
Voltage
Amps (Running)
Refrigerant
Charge (oz.)
Refrigerant
Running Pressures
Dimensions
L x W x H Including
pump(s) and motor(s)
Weight (lbs)
Bath Capacity (gal)
Bath Insulation
Thickness
Inlet Water Temperature
Inlet Water Pressure
Water Inlet & Outlet Fitting
Minimum Water Pipe Size
Flow Rate Minimum
Pressure Drop
Approval
*Power pack models are equipped with SMART DRAFT™, a temperature monitoring technology.
**Rated at 20° F evaporator temperature and 90° F ambient temperature. †.3GPM, water is only used when the tempera-
ture of the condenser rises high enough to open the cooling inlet valve. This is approximately 40% of the operating time
depending on the ambient temperature and usage. Condenser Inlet Water Temperature: Minimum 45° F / Maximum 85° F
Units manufactured prior to 2/1/2022 were produced with a 6-15P plug.
MICROMATIC.COM | 866-327-4159
EQUIPMENT SPECIFICATIONS
MMPP4307-PKG-3-WC MMPP4307-PKG-4*
Water Cooled*
11,500
1 1/2
3
Rotary Vane
80
1/3
9.52mm (3/8")
6-20P*
208/230
11.4A
R448a
1.04 kg (37 oz)
55 (low)
260 (high)
37.12" x 18.75" x 31.5"
134 kg / 295 lbs 134 kg / 295 lbs
11.5 gal / 43.5 L 11.5 gal / 43.5 L
1.5"
Min 45º / Max 85º
Min 40 psi
Max 120 psi
9.52mm (3/8")
3/8"
0.81 gpm
10 psi
ETL Listed
MMPP4307-PKG-4-WC
Air Cooled Water Cooled*
11,500 11,500
1 1/2
4
Rotary Vane Rotary Vane
80
1/3
9.52mm (3/8") 9.52mm (3/8")
6-20P 6-20P
208/230 208/230
14.5A
R448a R448a
1.04 kg (37 oz) 1.04 kg (37 oz)
55 (low) 55 (low)
260 (high) 260 (high)
38" x 30" x 36" 37.12" x 28.75" x 31.5"
134 kg / 295 lbs
11.5 gal / 43.5 L
1.5"
NA Min 45º / Max 85º
Min 40 psi
NA
Max 120 psi
NA 9.52mm (3/8")
NA
NA 0.81 gpm
NA
ETL Listed ETL Listed
1 1/2
4
80
1/3
14.5A
1.5"
3/8"
10 psi
POWER PACK SERVICE MANUAL | 7