AEG MS2600B User Manual page 6

2.1 Installing the appliance
4 mm
1. Remove all packaging and check carefully
for any signs of damage.
2. Fit the fixing hooks to the kitchen cupboard
using the instruction sheet and template
supplied.
3. Fit the appliance into the kitchen cupboard
6 ENGLISH
4 mm
4 mm
slowly, and without force. The appliance
should be lifted onto the fixing hooks and
then lowered into place. In the case of
interference during fitting, this hook is
reversible. The front frame of the oven
should seal against the front opening of the
cupboard.
4. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and the
top of the frame (see diagram).
2.2 Connecting the appliance to the
power supply
(A)
•
The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency. Or it
should be possible to isolate the oven from
the supply by incorporating a switch in the
fixed wiring in accordance with the wiring
rules.
•
The power supply cord may only be
replaced by an electrician.
•
If the supply cord is damaged it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
•
The socket should not be positioned behind
the cupboard.
•
The best position is above the cupboard,
see (A).
•
Connect the appliance to a single phase
220-240 V/50 Hz alternating current via a
correctly installed earth socket. The socket
must be fused with a 10 A fuse.
•
Before installing, tie a piece of string to the
power supply cord to facilitate connection