Vivotek IP8330 User Manual page 127

eptz <positive integer>
npreset <positive integer>
protocol_https < boolean >
protocol_rtsp < boolean >
protocol_sip <boolean>
protocol_maxconnec <positive integer>
tion
protocol_maxgenco <positive integer>
nnection
protocol_maxmegac <positive integer>
onnection
protocol_rtp_multic <boolean>
ast_scalable
protocol_rtp_multic <boolean>
ast_backchannel
protocol_rtp_tcp <boolean>
protocol_rtp_http <boolean>
protocol_spush_mjp <boolean>
eg
protocol_snmp <boolean>
protocol_ipv6 <boolean>
videoin_type 0, 1, 2
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
0/7 A 32-bit integer, each bit can be set separately
as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
0/7 Number of preset locations.
0/7 Indicate whether to support HTTP over SSL.
0/7 Indicate whether to support RTSP.
0/7 Indicate whether to support SIP.
0/7 The maximum allowed simultaneous
connections.
0/7 The maximum general streaming connections.
0/7 The maximum megapixel streaming
connections.
0/7 Indicate whether to support scalable multicast.
0/7 Indicate whether to support backchannel
multicast.
0/7 Indicate whether to support RTP over TCP.
0/7 Indicate whether to support RTP over HTTP.
0/7 Indicate whether to support server push MJPEG.
0/7 Indicate whether to support SNMP.
0/7 Indicate whether to support IPv6.
0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
VIVOTEK
User's Manual - 127