Vivotek IP8330 User Manual page 119

7.10 IR cut control
Group: ircutcontrol
NAME
mode
daymodebegintime
daymodeendtime
disableirled
bwmode
sensitivity
7.11 image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE
brightness -5 ~ 5
saturation -5 ~ 5
contrast -5 ~ 5
sharpness -3 ~ 3
mode preview,
restore,
save
7.12 image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE
brightness -5 ~ 5
saturation -5 ~ 5
VALUE SECURITY
(get/set)
auto, 6/6
day,
night,
di,
schedule
00:00~23:59 6/6
00:00~23:59 6/6
<boolean> 6/6
<boolean> 6/6
low, 6/6
normal,
high
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image according to mode settings.
4/4 Adjust saturation of image according to mode settings.
4/4 Adjust contrast of image according to mode settings.
4/4 Adjust sharpness of image according to mode settings.
7/4 Preview => Apply the parameters of image without saving.
Restore => Restore the previous saved image parameters.
Save => Directly save the adjust image parameters.
SECURITY
(get/set)
4/4
4/4
DESCRIPTION
Set IR cut control mode
Day mode begin time
Day mod end time
Enable/disable IR led
Switch to B/W in night mode if enabled
Sensitivity of light sensor
DESCRIPTION
Preview of brightness adjustment of image
according to mode settings.
Preview of saturation adjustment of image
VIVOTEK
User's Manual - 119