Vivotek IP8330 User Manual page 107

daylight_enable
daylight_dstactualmo
de
daylight_auto_beginti
me
daylight_auto_endtim
e
daylight_manual_offs
et
daylight_manual_begi
ntime
daylight_manual_endt
ime
daylight_timezones
updateinterval
restore
reset
restoreexceptnet
restoreexceptdst
<boolean> 6/6
<boolean> 6/7
string[19] 6/7
string[19] 6/7
<integer> 6/6
string[19] 6/6
string[19] 6/6
string 6/6
0, 6/6
3600,
86400,
604800,
2592000
0, 7/6
<positive integer>
0, 7/6
<positive integer>
<Any value> 7/6
<Any value> 7/6
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
Enable automatic daylight saving time in time
zone.
Check if current time is under daylight saving
time.
(Used internally)
Display the current daylight saving start time.
(product dependent)
Display the current daylight saving end time.
(product dependent)
Manually set daylight saving time with offset.
Manually set daylight saving time beginning.
Manually set daylight saving time end.
List time zone index which support daylight
saving time.
0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
Restore the system parameters to default
values after <value> seconds.
Restart the server after <value> seconds if
<value> is non-negative.
Restore the system parameters to default
values except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system
parameters will be restored to the default
value except for a union of the combined
results.
Restore the system parameters to default
values except all daylight saving time
VIVOTEK
User's Manual - 107