Vivitar Vivicam 3550 User Manual page 22

Install camera drivers ......
10. Click Next button to start camera driver installation
11. When installation is complete, click Finish button to restart your computer
12. After the computer is restarted, power up your camera
13. Switch the Mode dial to PC mode
14. Connect the camera and computer with the USB cord
15. Removable disk will automatically be installed in your computer. Several screens will
appear momentarily.
16. When Removable disk installation is complete, press MENU, DOWN, ENTER buttons
on the camera to select Silent Video mode
17. Video driver will be installed in your computer
18. Drivers installation is complete.
Note: The installed camera driver may conflict other USB devices in your computer system.
Check the image files
1. Make sure the camera is connected to your computer and is in Mass Storage mode.
Press MENU, UP, ENTER buttons on the camera if necessary.
2. Open Windows Explorer
3. Search through Removable Disk>Dcim>100cnxnt and double-click on the 100cnxnt
folder
4. The image files are shown in the right pane
21