Table of Contents
Advertisement
16
V
S
ISIONEER
TROBE
XP 220 S
U
'
CANNER
SER
S
S
3: C
TEP
ALIBRATE THE
1. After the computer loads the appropriate software to run the
scanner, the Found New Hardware Wizard window opens.
2. You will need the calibration page that you received with your
scanner for the calibration process. The calibration page is in a
plastic storage bag. Remove the calibration page from its plastic
storage bag.
3. Before you start the calibration, please move the scanner's Paper
Return into the Up position so the calibration page will feed
straight through the scanner.
The Calibration Page.
4. Now click Next on the Found new Hardware Wizard window.
G
UIDE
S
CANNER
Move the Paper Return
to the Up position.
Advertisement
Table of Contents
