Visioneer Strobe XP 220 User Manual page 118

Note: The Device Configuration Properties window is also available
from the Windows Control Panel under Scanners and Cameras.
For Windows XP: Right-click on the Visioneer Strobe XP 220
icon, select Properties, then select Device Settings.
For Windows 2000: Select the Visioneer Strobe XP 220 icon, click
on the Properties button, then select Device Settings.
6. To recalibrate, click the Calibrate button.
The Calibration window opens.
7. To clean the scanner, click the Clean button.
The Cleaning window opens.
R C
ECALIBRATING AND LEANING
Y S 113
OUR CANNER