Visioneer Strobe XP 220 User Manual page 99

94 V S
ISIONEER TROBE
XP 220 S U '
CANNER SER S
Note: Also make sure to set the page size larger than the item that
you're scanning so the Autocrop to Original process will have
sufficient room on the page to crop the image properly.
AutoCrop to Length—Select this option to let the scanner
■
automatically crop the scanned document from the top to the
bottom edge of the page, affecting only the length of the
document. The width of the scan area is not affected. The scan
width is determined by the chosen page size.
Filter—The Filter is the ability of your scanner to automatically
■
remove a color from a scanned item. For example, if you are
scanning a letter with a red watermark, you can choose to filter
out the red so the scanned letter just shows the text and not the
red watermark. The Filter option applies to Black&White or
Greyscale Mode.
The original with a red
watermark over black text.
Reduce Moire Patterns—Moire patterns are wavy, rippled lines
■
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for
the Greyscale or Color Mode at 200 dpi or less.
G
UIDE
The scanned item with the
red filtered out.