Visioneer Strobe XP 220 User Manual page 129

124 V S
ISIONEER TROBE
XP 220 S U '
CANNER SER S
4. Select the Device Settings tab.
The options are the same as shown on the Device Configuration
Properties above.
5. Click to uncheck the option, Enable the generation of events
when paper is inserted into the scanner, to turn off the
AutoLaunch feature.
6. Click OK, then close the Scanners and Cameras Control Panel
window.
7. To turn the AutoLaunch and Excessive Skew features back on later,
follow the same process, but click Reset Device or re-select the
options you unchecked in Step 2 above, and click OK.
G
UIDE