UTStarcom GPRS758 User Manual page 48

Setting
Using a Data or Fax Call
To be able to use data or fax services, you need application
software such as a data or a fax program. Before using these
functions, you need to connect your phone to the computer and
make sure that your phone is registered as a modem in your system.
Making a Data or Fax Call
Using a Data Call
1
Choose "(Single No.) Data" item in phone menu.
2
Connect the phone to your computer with the cable.
3
After starting the software for network connecting (built in
Windows System), make the data service using the browser of
Windows System.
After using the Data Call, set the mode to "(Single No.) Voice".
Usage : Prior to using Data Call, you must first set your phone as a
modem in the Windows system(Start > Settings > Control Panel >
Modem or Telephone/Modem Option). Register your phone as a
"standard 19200 bps modem" and set the COM port number to
which the cable is connected. ( Set the port 115200 bit/sec)
Data Call : You set the software using the Widows system (Start >
Settings > network connect), and use the data service. ( This service
is related to net-work services. For more information, please
contact your service provider )
93
Using a Fax Call
1
Choose "(Single No.) Fax" item in phone menu.
2
Connect the phone to your computer with the cable.
3
After starting the software for Fax, use the Fax services.
After using the Fax Call, set the mode to "(Single No.) Voice".
Example : Fax Call :
1. Connect the phone to the computer using the cable.
2. Open WinFax 10.0 in Windows.
3. Check that configuration is set to 19200 bps modem with the compatible
COM port.
4. Set the Receive Mode to AUTO RECEIVE.
Otherwise, set MANUAL RECEIVE when the incoming animation plays.
94