Eagle Group RediPak Assembly Instructions

PART #A211091
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Before you begin assembling unit, posts must be assembled first.
Bottom halves feature leveling foot and threaded tubing. Screw bottom half of each post into top half.
leveling foot
Step 1 - Attach split sleeves
(for bottom shelf) to posts.
• The wider part of the taper goes toward
the bottom.
• Make sure rib on split sleeve is seated into
a groove on the post.
Note: The number covered by the split sleeve
indicates approximate height of shelf.
6
5
split
sleeves
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2006 by the Eagle Group
RediPak
Wire Shelving Kit
ASSEMBLY INSTRUCTIONS
CAUTION
SAVE YOUR BOX AND ALL PACKING MATERIALS.
bottom half
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
®
threaded end
post
bottom
shelf
split
sleeve
top half
Step 2 - Mount bottom shelf.
corner
collar
post
split
sleeve
(continued on back page)
EG9801 Revised 12/06
.