Eagle Group STR2430B Assembly Instructions

PART #A202582
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Step 1 - Attach four-sided frame to posts.
Snap split sleeves onto posts at desired height.
• The wider part of the taper goes toward the bottom.
• Make sure rib on split sleeve is seated into a groove on the post.
Note: For an NSF installation, this must be mounted at the 5th
groove or above.
Step 2 - Attach three-sided frame to posts.
Note: Attach cable assembly BEFORE mounting
three-sided frame.
Snap split sleeves onto top groove of posts.
split
sleeves
collar
post
Slide collars over
posts and down
sleeve
onto split sleeves.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2007 by the Eagle Group
Style "A" Tank Rack
ASSEMBLY INSTRUCTIONS
For assembly of style "B" tank rack, see reverse page.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
6
5
split
sleeves
Slide collars over
posts and down onto
split sleeves.
split
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
CAUTION
collar
post
split
sleeve
assembly
three-sided
frame
dunnage
matt
post
four-sided
frame
cable
Step 3 - Mount dunnage matt onto
four-sided frame.
Note: If optional drip pan is being used, the drip
pan mounting brackets must be placed on the
four-sided frame BEFORE placing the wire matt.
The pan slides between the mounting brackets.
EG9956
(End)
Revised 03/07