HP A4500A - VMEbus Single Board Computer 744 Motherboard Release Note page 9

Chapter 1
In another case, swinstall, when used to install any software, will stop
or exit, forcing the user to set mount_all_filesystems=false.
The patch is available at either of these web sites:
Americas and Asia-Pacific: http://us-support.external.hp.com/
Europe: http://europe-support.external.hp.com/
Troubleshooting Information for PAM-NTLM
• If you are having difficulty accessing the password server configured
in smb.conf, PAM-NTLM can utilize an lmhosts file on the local
system to look up its address. To utilize this functionality, create the
file, /etc/opt/samba/lmhosts, containing entries, one per line, in the
following format where netbios_name is the password server used by
PAM-NTLM.
ip_address <one or more tabs or spaces> netbios_name
• If you are going to remove the PAM-NTLM fileset (or the entire
CIFS/9000 Client) from your system, ensure that all references to the
libpam_ntlm.1 library have been removed from /etc/pam.conf. Your
system can become inaccessible if PAM-NTLM is configured in
/etc/pam.conf but the PAM-NTLM libraries are removed from the
system.
• Use caution when editing /etc/pam.conf. You should have a good
understanding of the PAM framework before modifying this file. A
misconfigured /etc/pam.conf can make the system inaccessible or
cause a serious security breach, such as allowing root access to
anyone, without a password. See the reference to pam.conf in section
4 of the HP-UX manpages and in the PAM-NTLM Configuration
section in Installing and Administering the CIFS/9000 Client.
Recommended Configuration Values
HP recommends changing the value of the following three configuration
parameters to their new default values:
•
runAsUser
•
requestTimeout
• nfsAttributeCaching (you will need to add this one)
CIFS/9000 Client A.01.08
Features and Fixes in Recent Releases
9