Table of Contents
Advertisement
G31-M7G DVI BIOS Manual
Restore on AC Power Loss
T his setting specifies how your system should behave after a power fail or interrupts
occurs. By choosing Disabled will leave the computer in the power off state.
Choosing Enabled will restore the system to the status before power failure or
interrupt occurs.
Options:
Power O ff (Default) / Power ON / Last State
Hardware Health Configuration
T his item shows the system temperature, fan speed, and voltage information.
Advan ced
Hardware Healt h Configuration
H/W Health Fun ction
Shutdown Tempe rature Function[Dis abled]
CPU Temperatur e
CPU FAN Speed
SYS FAN Speed
CPU Vcore
Chipset Voltag e
+3.30V
+5.00V
+12.0V
FSB Voltage
Memory Voltage
5V(SB)
vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc.
H/W Health Function
If you computer contains a monitoring system, it will show PC health status during
POST stage.
Options:
Enabled (Default) / Disabled
Shutdow n Temperature Function
T his item allows you to set up the CPU shutdown T emperature. This item is only
effective under Windows 98 ACPI mode.
Options:
Disabled (Default) / 60℃/140℉ / 65℃/149℉ / 70℃/158℉ / 75℃/167℉
/ 80℃/176℉ / 85℃/185℉ / 90℃/194℉
BIOS SETU P U TILITY
[Ena bled]
11
Enables Hardware
Health Monitoring
Device.
S elect Screen
S elect Item
+-
C hange Option
F1
G eneral Help
F10
S ave and Exit
ESC
E xit
Advertisement
Table of Contents
