Boot Other Device; Swap Floppy Drive - Biostar G31-M7 Bios Manual

Bios setup
Hide thumbs Also See for G31-M7:
Table of Contents

Advertisement

G31-M7/P31-A7
First/Second/Third Boot Device
The BIOS will attempt to load the operating system in this order.
The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD,
USB-ZIP, USB-CDROM, Legacy LAN, Disabled.

Boot Other Device

When enabled, BIOS will try to load the operating system from other device
when it failed to load from the three devices above.
The Choices: Enabled (default), Disabled

Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical
drive assignments.
The Choices: Disabled (default), Enabled
Boot Up Floppy Seek
When enabled, System will test the floppy drives to determine if they have 40
or 80 tracks during boot up. Disabling this option reduces the time it takes to
boot-up.
The Choices: Enabled (default), Disabled.
Report No FDD For WIN 95
The Choices: No (default), Yes.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P31-a7

Table of Contents