Table of Contents
Advertisement
4 Boot Menu
This menu allows you to setup the system boot options.
Main
Advanced
Boot Settings Configuration
> Boot Device Priority
> Hard Disk Drives
> Removable Drives
> CD/DVD Drives
Quick Boot
Full Screen LOGO Show
AddOn ROM Display Mode
Bootup Num-Lock
Interrupt 19 Capture
Ignore Memory Error Messages [Disabled]
BOOT SUCCESS BEEP
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Boot Device Priority
Items in this sub-menu specify the boot device priority sequence from the
available devices. The number of device items that appears on the screen
depends on the number of devices installed in the system.
Options: Removable / Hard Disk / CDROM / Legacy LAN / Disabled
Hard Disk Drives
The BIOS will attempt to arrange the hard disk boot sequence automatically.
You can also change the booting sequence. The number of device items that
appears on the screen depends on the number of devices installed in the
system.
Options: Pri. Master / Pri. Slave / Sec. Master / Sec. Slave / USB HDD0 /
USB HDD1 / USB HDD2 / Bootable Add-in Cards
Removable Drives
The BIOS will attempt to arrange the removable drive boot sequence
automatically. You can also change the booting sequence. The number of
device items that appears on the screen depends on the number of devices
installed in the system.
Options: Floppy Disks / Zip100 / USB-FDD0 / USB-FDD1 / USB-ZIP0 /
USB-ZIP1 / LS120
TA960 BIOS Manual
BIOS SETUP UTILITY
PCIPnP
Boot
Chipset
[Enabled]
[Enabled]
[Force BIOS]
[ON]
[Disabled]
[Enabled]
18
Performance
Exit
Specifies the
Boot Device
Priority sequence.
Select Screen
Select Item
Go to Sub Screen
Enter
F1
General Help
Save and Exit
F10
ESC
Exit
Advertisement
Table of Contents
