Xiaomi H500 Manual

Product Overview

1. On/Off Switch
   High
   Low
   Off
2. Temperature Button
   Hot
   Hot & Cold Cycle
   Cold
3. Temperature Indicator
4. Air Outlet
5. Air Nozzle
6. Air Duct
7. Air Intake
8. Handle
9. Power Cord

Product Features

This hair dryer uses ionic technology, which helps to reduce the accumulation of static electricity in hair, helps moisture get into the core of the hair, and at the same time tightens hair scales and makes the hair more healthy and lustrous.
While using the hot & cold cycle, the hair dryer monitors the ambient temperature at the air inlet by using the intelligent temperature control module to automatically adjust the time of the alternating hot and cold air to tighten hair scales and reduce the risk of discomfort to the scalp or damage to the hair caused by high temperature.

1. Water ions are microparticle ions that are decomposed by water at high voltage and are surrounded by moisture.
2. While using this hair dryer in the Hot, Hot & cold Cycle or Cold mode, the air that is blown out contains water ions.
3. The following conditions may occur when this hair dryer is generating water ions:

• Water droplets come out of the air outlet.
• It emits a unique odor during use, yet it does not cause any harm to the body.

4. Those with the following hair types may benefit less from the water ion effect:
   • People with natural curls People whose hair easily curls
   • People with good hair quality
   • People who got a negative-ion perm less than 3 to 4 months ago
   • People with short hair
5. Water ions are produced by gathering moisture in the air. However, in some cases, it may be difficult to produce water ions due to the environmental conditions. For example, it is difficult to gather moisture in the air at low temperatures and low humidity, when negative ions are generated.

How to Use

1. First, make sure the switch is in the off position 〇, then plug the power plug into the outlet and switch to the low (I) or high (II) setting.
   
2. The first time the hair dryer is turned on, it is set to hot air mode by default. Briefly press the air temperature button to cycle through the air temperature modes. The next time the hair dryer is turned on, it is set to mode that was used before it was turned off. Note: While in different air temperature modes, the corresponding indicator status is as follows:
   
3. This product is equipped with a magnetic, detachable air nozzle that can rotate 360 degrees.
   
   
   Please install the air nozzle while the hair dryer is turned off. Do not adjust or remove the air nozzle during use to avoid getting scalded.
   
   Note: During use, please keep your hair at least 10 cm away from the air intake to avoid hair from getting caught in the hair dryer. Please make sure to keep your hair at least 3 cm away from the air outlet to avoid hair damage due to overheating.
   
4. After use, turn off the hair dryer and unplug the power cord.
   

Daily Care & Maintenance

Always turn off the power switch and unplug the power cord before cleaning or maintaining the hair dryer.

Cleaning the filter and removable back cover:

• Firmly hold the hair dryer's handle with one hand and use the palm of the other hand to press and turn the back cover of the air intake counterclockwise to remove it.
• Once the back cover is removed, use a lint-free cloth or soft brush to clean the dust and impurities from the filter and back cover. Do not use water.
• Once cleaning is completed, align the " " on the back cover with the " " on the hair dryer to install it, and then turn it clockwise to snap it into place.
  

Notes:

• Please regularly clean the body of the hair dryer with a clean, soft cloth and clean the air outlet and nozzle with a cotton swab or soft brush.
• Do not press or rub the air intake and outlet with fingernails or sharp objects, etc. to avoid damage to the product.
• Do not use alcohol, nail polish remover or detergent to clean the hair dryer, as this may cause malfunctions, cracking, or discoloration.

Specifications

Troubleshooting

Safety Instructions

To reduce the risk of malfunction, electric shock, injury, fire, death, and damage to equipment or property, make sure to observe the following safety precautions.

Symbol Descriptions

Indicates the potential hazards that may result in serious injuries or death.

Indicates the risk of minor injuries.
Alerts the user that certain operating steps are prohibited.
Alerts the user that certain operating steps must be followed in order to safely operate this product.


Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.

Power Cord & Plug
Do not use the hair dryer if the power cord or power plug is damaged or overheated, as this may cause burns, electric shocks, or cause a fire due to a short circuit.
Do not use the hair dryer if the power plug that is plugged into the electrical outlet is loose, as this may cause burns, electric shocks, or cause a fire due to a short circuit.
Do not plug in or unplug the power plug with wet hands, as this may result in electric shocks or injury.
Do not use the hair dryer if the power cord is tied together, as this may cause electric shocks, or cause a fire due to a short circuit.
Do not damage, modify, forcefully bend, pull, twist, or squeeze the power cord, nor place heavy objects on top of it, as this may cause electric shocks, or cause a fire due to a short circuit.

Do not pull the power cord when unplugging the power plug. Make sure to hold the power plug when unplugging it. Otherwise, the power cord may get damaged, cause burns, cause electric shocks, or cause a fire due to a short circuit.
Completely and directly plug the power plug into a 220 V–240 V~ electrical outlet. Do not use a power strip or extension cords, as this may cause electric shocks, or cause a fire due to a short circuit.
If the power cord is damaged or broken, it must be replaced with a genuine power cord purchased from the manufacturer or after-sales service department to avoid safety hazards.
When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.