Table of Contents
Advertisement
Make calls
Voice calls
1. In the home screen, enter the phone number, including
the area code. To remove a number, press the
backspace key.
For international calls, press + (+ replaces the
international access code), and enter the country code,
area code (omit the leading zero if necessary), and
phone number.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if another
application is active.
To make a call from the contacts list, select
Contacts. Scroll to the desired name, or enter the first
letters or characters of the name to the search field. To call
the contact, press the call key. If you have saved several
numbers for a contact, select the desired number from the
list, and press the call key.
Options during a call
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select
To send an image or a video clip in a multimedia message
to the other participant of the call, select
MMS
change the recipient before sending. Press the call key to
send the file to a compatible device (network service).
To put an active voice call on hold while answering
another incoming call, select
between the active and the held call, select
Swap.
To send DTMF tone strings (for example, a password),
select
search for it in Contacts. To enter a wait character (w) or a
pause character (p), press * repeatedly. To send the tone,
select OK. You can add DTMF tones to the phone number
or DTMF fields in a contact card.
Menu
>
During an active call, to route the sound from the handset
to the loudspeaker, select
loudspeaker. If you have attached a compatible headset
with Bluetooth connectivity, to route the sound to the
headset, select
back to the handset, select
handset.
To end an active call and replace it by answering the
waiting call, select
Unmute
first.
(in 3G networks only). You can edit the message and
Options
Options
Send
DTMF. Enter the DTMF string or
>
Tip: When you have only one active voice call, to put
the call on hold, press the call key. To activate the
call, press the call key again.
Options
Options
Activate
>
Options
Options
> Replace.
Options
Send
>
> Hold. To switch
Options
>
Activate
>
handsfree. To switch
Activate
>
29
Advertisement
Table of Contents
