Wlan Security Settings; X Security Settings; Wep Security Settings; Wpa Security Settings - Nokia 002M1S1 - E72 Smartphone 250 MB User Manual

To restore all settings to their original values, select
Options Restore defaults.
>

WLAN security settings

Select Menu Ctrl. panel
>
Destinations Access
>
on the display.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with .
To enter the settings for the selected security mode, select
WLAN security settings.

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the required
WEP keys. When the WEP security mode is in use, and your
device receives a data packet not encrypted with the WEP
keys, the data is discarded.
In an ad-hoc network, all devices must use the same WEP
key.
Select WLAN security settings
WEP key in use — Select the desired WEP key.
•
Authentication type
•
WEP key settings — Edit the settings for the WEP key.
•
Settings and Connection
>
point, and follow the instructions
and from the following:
— Select Open or Shared.
WEP key settings
In an ad-hoc network, all devices must use the same WEP
key.
Select WLAN security settings
from the following:
>
WEP encryption
•
key length.
WEP key format
•
the WEP key data in
WEP key — Enter the WEP key data.
•

802.1x security settings

Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select WLAN security settings
WPA/WPA2 — Select
•
Protocol) or Pre-shared key
device identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.

WPA security settings

Select WPA/WPA2 as the WLAN security mode.
WEP key settings
>
— Select the desired WEP encryption
— Select whether you want to enter
ASCII or Hexadecimal
and from the following:
EAP (Extensible Authentication
(a secret key used for
— If you selected WPA/WPA2
— If you selected WPA/WPA2
and
format.
>
Pre-
>
121