Table of Contents
Advertisement
Pair devices
Select
Menu
Settings
>
To pair with compatible devices and view your paired devices, open the
devices
tab.
Before pairing, create your own passcode (1 to 16 digits), and agree with the owner
of the other device to use the same code. Devices that do not have a user interface
have a factory-set passcode. The passcode is used only once.
1. To pair with a device, select
within range are displayed.
2. Select the device, and enter the passcode. The same passcode must be entered
on the other device, as well.
3. Some audio accessories connect automatically to your device after pairing.
Otherwise, to connect to an accessory, select
device.
Paired devices are indicated by
To set a device as authorised or unauthorised, select from the following:
Set as authorised
●
device can be made without your knowledge. You will not be asked for
authorisation or acceptance separately. Use this status only for your own devices,
such as your compatible headset or PC, or devices that belong to someone you
trust.
indicates authorised devices in the paired devices view.
Set as unauthorised
●
separately every time.
To cancel a pairing with a device, select
To cancel all pairings, select
Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a tone sounds, and you are
asked if you want to accept the message. If you accept,
© 2009 Nokia. All rights reserved.
and
Connectivity
Options
in the device search.
— Connections between your device and the authorised
— Connection requests from this device must be accepted
Options
>
> Bluetooth.
New paired
device. Devices that are
>
Options
Options
> Delete.
Delete
all.
Connectivity
Paired
Connect to audio
>
is displayed, and the
115
Advertisement
Table of Contents
