Table of Contents
Advertisement
To view advanced settings, select
advanced settings for the WLAN is not recommended.
Access points
Create a new access point
Select
Menu
Settings
>
You may receive access point settings in a message from a service provider. Some
or all access points may be preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
When you open one of the access point groups (
access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN with the WLAN wizard.
To create a new access point, select
available connections. After the search, connections that are already available are
shown and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, open one of the access point groups, and
select an access point. Follow the instructions from your service provider.
Connection name
●
Data bearer
— Select the data connection type.
●
Depending on the data connection you select, only certain setting fields are
available. Fill in all fields marked with
can be left empty, unless your service provider has instructed otherwise.
© 2009 Nokia. All rights reserved.
Options
and
Connectivity
Access
— Enter a name for the connection.
Must be defined
Advanced
settings. Changing the
>
> Destinations.
,
,
,
point. The device asks to check for
or with a red *. Other fields
Connectivity
), you can see the
107
Advertisement
Table of Contents
