Aeroflex ProLock 2201 Getting Started Manual
Aeroflex ProLock 2201 Getting Started Manual

Aeroflex ProLock 2201 Getting Started Manual

3g test set for service
Hide thumbs Also See for ProLock 2201:

Advertisement

Quick Links

2201 ProLock
3G test set for service
Getting Started Manual
For serial numbers 0003001 and higher
www.valuetronics.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProLock 2201 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Aeroflex ProLock 2201

  • Page 1 2201 ProLock 3G test set for service Getting Started Manual For serial numbers 0003001 and higher www.valuetronics.com...
  • Page 2 www.valuetronics.com...
  • Page 3 No part of this guide may be reproduced or transmitted electronically or otherwise without written permission of the publisher. Trademarks Aeroflex is a trademark of Aeroflex Incorporated in the U.S.A. and other countries. Specifications, terms and conditions are subject to change without notice.
  • Page 4 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 5: Table Of Contents

    Table of Contents About This Guide Purpose and scope ........Assumptions .
  • Page 6 Table of Contents Chapter 2 Installation Scope of delivery ........8 Software requirements .
  • Page 7: About This Guide

    About This Guide This section contains the following basic information: – “Purpose and scope” on page vi – “Assumptions” on page vi – “Related information” on page vi – “Technical assistance” on page vii – “Conventions” on page vii 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 8: Purpose And Scope

    About This Guide Purpose and scope Purpose and scope The purpose of this guide is to help you successfully use the 2201 ProLock features and capabilities. This guide includes task-based instructions that describe how to install and use the 2201 ProLock.
  • Page 9: Technical Assistance

    Technical assistance Technical assistance If you need assistance or have questions related to the use of this product call Aeroflex’s technical support. You can also contact Aeroflex by e-mail at support-muc@aeroflex.com. Conventions This guide uses naming conventions and symbols, as described in the following tables.
  • Page 10 About This Guide Conventions Table 2 Keyboard and menu conventions Description Example A plus sign + indicates Press Ctrl+s simultaneous keystrokes. A comma indicates consec- Press Alt+f,s utive keystrokes. A slanted bracket indicates On the menu bar, click choosing a submenu from Start >...
  • Page 11: Safety Notes

    Safety Notes This chapter provides the safety notes for the 2201 ProLock. Topics discussed in this chapter include the following: – “Safety class” on page x – “Safety warnings” on page x – “Declaration of EU Conformity” on page xi 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 12: Safety Class

    Do not try to open the power supply. There are no serviceable parts inside. If the power supply is defective you can obtain a new one from Aeroflex (order number M 860 224). Safety warnings This product is designed for indoor use. As exposure to water may damage the instrument it has to be protected against mois- ture when used outdoors.
  • Page 13: Declaration Of Eu Conformity

    Safety Notes Declaration of EU Conformity Declaration of EU Conformity 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 14 Safety Notes Declaration of EU Conformity 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 15: 2201 Prolock Overview

    2201 ProLock Chapter 1 Overview This chapter provides a general description of the 2201 ProLock. Topics discussed in this chapter include the following: – “About the 2201 ProLock” on page 2 – “Features and capabilities” on page 3 – “Options” on page 3 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 16: About The 2201 Prolock

    About the 2201 ProLock About the 2201 ProLock Aeroflex’s 2201 ProLock is a reasonably priced test instrument for 3G mobile phones and wireless data cards. Level 1 and level 2 service shops use the ProLock to quickly test wireless devices, perform smaller repairs and bill manufacturers for warranty claims.
  • Page 17: Features And Capabilities

    Chapter 1 2201 ProLock Overview Features and capabilities Features and capabilities Affordable mobile phone test set for point-of-return and service tests Separates defective from faultless phones RF connector on the back for clear and tidy work bench Select any or all of these systems: GSM, GPRS, EPGRS (EDGE), WCDMA Includes remote control software for easy-to-use Go/NoGo testing from a PC through 7311 Lector Basic...
  • Page 18: 2232 Gprs Option

    Chapter 1 2201 ProLock Overview Options – Burst length – BER – Reported RSSI 2232 GPRS The 2232 GPRS Option is an extension of the 2231 GSM Option, adding the necessary protocol for the GPRS Attach and to set up Option a test channel.
  • Page 19: 2260 Coupling Factor Update License

    Chapter 1 2201 ProLock Overview Options 2260 Coupling With tests over the antenna, good power and receiver measure- ment accuracy is only achieved with the exact knowledge of the Factor Update antenna coupling factor, which depends on the phone model and License the coupling device.
  • Page 20: Chapter 1 2201 Prolock Overview System Architecture

    Chapter 1 2201 ProLock Overview System architecture System architecture 2201 ProLock serves for testing mobile phones and wireless terminals such as WCDMA data cards. The unit under test can be connected either directly using an adapter cable (if the phone has an RF input/output connector) or through an RF coupler such as the Willtek 4916 Antenna Coupler.
  • Page 21: Installation

    Installation Chapter 2 This chapter describes how to set up the 2201 ProLock. The topics discussed in this chapter are as follows: – “Scope of delivery” on page 8 – “Software requirements” on page 8 – “Hardware requirements” on page 8 –...
  • Page 22: Scope Of Delivery

    Chapter 2 Installation Scope of delivery Scope of delivery When unpacking the 2201 ProLock, ensure that you do not miss any of the following items: – 2201 ProLock – Power supply – Power cord – Manual Pack, including – this Getting Started manual –...
  • Page 23: Rf Connection And Shielding

    Chapter 2 Installation Setting up the hardware In addition, the PC needs an interface to the instrument to be controlled. Ensure that both the PC and the instrument can be connected using one of the following interfaces supported by ProLock: –...
  • Page 24 Chapter 2 Installation Setting up the hardware 2 Connect one end of the AC power cord to the mains power supply, and the other to a mains outlet. 3 Connect the RF I plug on ProLock’s rear panel with the 4921 RF Shield using a double-shielded RF cable.
  • Page 25: Installing The Software

    Chapter 2 Installation Installing the software connection: Use a standard CAT-5 LAN cable to connect the LAN plug on ProLock’s rear panel with a LAN wall outlet if you are using a local area network. Or use the cross-patch LAN cable that is included in the scope of delivery to connect the ProLock to a PC directly.
  • Page 26 Chapter 2 Installation Installing the software If you are using a Windows Vista PC, the operating system may ask you for USB driver software after connecting the 2201 ProLock over the USB for the first time. In this case, insert the Lector and Scriptor CD in your CD drive and indicate the fol- lowing directory on the CD for the USB driver: ProLock-USB-Vista.
  • Page 27: Configuring The Software

    Chapter 2 Installation Configuring the software Each device can be defined as follows by selecting the appro- priate entries: Table 5 Transport input fields in the Connection menu Transport Parameters Remarks type USB/ COM port For RS-232 connections, use the RS-232 (range 1 –...
  • Page 28 Chapter 2 Installation Configuring the software 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 29: Operation

    Operation Chapter 3 This chapter describes the functionality of the instrument. Topics discussed in this chapter are as follows: – “Connecting the 2201 ProLock” on page 16 – “Powering the unit” on page 21 – “Using the front panel” on page 22 –...
  • Page 30: Connecting The 2201 Prolock

    Chapter 3 Operation Connecting the 2201 ProLock Connecting the 2201 ProLock The 2201 ProLock offers different connectors for a variety of applications. The following section describes the connectors available and provides information on technical data and applica- tion purposes. The 2201 ProLock can be operated from an external DC source such as the power supply which is delivered with ProLock, or a car battery.
  • Page 31: Usb

    Chapter 3 Operation Connecting the 2201 ProLock Use a 50  shielded RF cable with an N-type connector (male) to connect to the unit under test; simply screw the connector tight to the instrument. If you have a 50  shielded RF cable with a BNC connector (male), use an N to BNC adapter to connect the cable to ProLock.
  • Page 32: Lan, Usb-A

    Chapter 3 Operation Connecting the 2201 ProLock LAN, USB-A There is an RJ-45 LAN plug on the right-hand side of the rear panel. Additional USB plugs can be found below the LAN plug. The 2201 ProLock can be controlled from an external computer via a local area network (LAN), using a TCP/IP connection at 10 or 100 Mbit/s.
  • Page 33: Ref I N

    Chapter 3 Operation Connecting the 2201 ProLock RS-232 This 9-pin sub-D connector on the rear panel of the 2201 ProLock can be used to control ProLock remotely via serial inter- face (RS-232). The command set and the responses conform to the SCPI standard and are explained in the user’s guide.
  • Page 34 Chapter 3 Operation Connecting the 2201 ProLock WARNING The input for the external trigger signal is designed for TTL input levels only. Higher levels at this port can damage the instrument! 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 35: Powering The Unit

    Chapter 3 Operation Powering the unit Powering the unit Once the 2201 ProLock is connected to mains and the unit under test, the instrument can be powered on with the power switch on the front panel (left-hand side). Once the instrument is switched on, it takes a couple of seconds for the instrument to load and start its firmware.
  • Page 36: Chapter 3 Operation Using The Front Panel

    Chapter 3 Operation Using the front panel Using the front panel The LCD screen shows the menus that guide you through config- uration and measurements when the 2201 ProLock is switched on and the operating software is loaded. The menus consist of different sections as follows: 2201 ProLock Serial number 0003xxx and higher...
  • Page 37: Keypad

    Chapter 3 Operation Using the front panel The top row shows the signaling and instrument status on the left. On the right-hand side, the top row displays the current menu name. The bottom row displays the meaning of the softkeys that are located beneath the LCD screen.
  • Page 38 Chapter 3 Operation Using the front panel On-off switch See “Powering the unit” on page Softkeys The softkeys are the six keys below the LCD screen. The meaning depends on the currently active menu and is displayed on the screen, above the softkeys. If the description for the right-most softkey displays “1/2”...
  • Page 39: Navigating The User Interface

    Chapter 3 Operation Navigating the user interface Function keys The Backspace function key can be used in input mode to erase the character in front of the current cursor position. The Escape function key is used in menu mode to leave the current menu and move one menu level up.
  • Page 40 Chapter 3 Operation Navigating the user interface 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 41: Warranty And Repair

    Warranty and Repair Appendix A This chapter describes the customer services available through Aeroflex. Topics discussed in this chapter include the following: – “Warranty information” on page 28 – “Equipment return instructions” on page 29 2201 ProLock Serial number 0003xxx and higher...
  • Page 42: Appendix A Warranty And Repair Warranty Information

    (except batteries) which in Aeroflex’s sole opinion proves to be defective within the scope of the warranty. In the event Aeroflex is not able to modify, repair or replace nonconforming defective parts or components to a condition as warranted within a reasonable time after receipt thereof, the buyer shall receive credit in the amount of the original invoiced price of the product.
  • Page 43: Equipment Return Instructions

    Aeroflex on request. If the original container is not available, the unit should be carefully packed so that it will not be damaged in transit. Aeroflex is not liable for any damage that may occur during shipping. The customer should clearly mark the Aeroflex-issued RA or reference number on the outside of the package and ship it prepaid and insured to Aeroflex.
  • Page 44 Appendix A Warranty and Repair Equipment return instructions 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 45: End-User License Agreement

    End-User License Appendix B Agreement This appendix describes the conditions for using the software. 2201 ProLock Serial number 0003xxx and higher www.valuetronics.com...
  • Page 46 Aeroflex shall not be held liable for any damages suffered or incurred by you or any other third party (including, but not limited to, general, special, consequential or incidental damages...
  • Page 47: Publication History

    New options added. 1007-000-A New layout. Aeroflex and its logo are trademarks of Aeroflex Incorporated. All other trademarks and registered trademarks are the property of their respective owners. Specifications, terms and conditions are subject to change without notice. © Copyright 2010 Aeroflex GmbH. All rights reserved.
  • Page 48 Manual ident: M 295 003 Manual version: 1007-000-A www.valuetronics.com...

Table of Contents