Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device
at the same time.
1.
Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Photos.
2.
Select the item and
Bluetooth.
To interrupt the search, select Stop.
3.
Select the device with which you want to connect.
4.
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode.
See "Pair devices", p. 49.
When the connection is established,
displayed.
Pair devices
To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity, scroll
right.
Before pairing, create your own passcode (1 to 16 digits),
and agree with the owner of the other device to use the
© 2008 Nokia. All rights reserved.
Options
Send
Via
>
>
Sending data
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
1.
To pair with a device, select
device. Devices that are within range are displayed.
2.
Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
3.
Some audio enhancements connect automatically to
your device after pairing. Otherwise, scroll to the
enhancement, and select
audio
device.
Paired devices are indicated by
To set a device as authorised or unauthorised, scroll to
the device, and select from the following options:
Set as authorised
●
device and the authorised device can be made without
your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or PC or
is
devices that belong to someone you trust.
authorised devices in the paired devices view.
Set as unauthorised
●
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options
> Delete.
If you want to cancel all pairings, select
Delete
all.
Options
New paired
>
Options
Connect to
>
in the device search.
— Connections between your
— Connection requests from this
Options
indicates
>
49