Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
Keep the device dry. Precipitation, humidity, and all
●
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
Do not use or store the device in dusty, dirty areas. Its
●
moving parts and electronic components can be
damaged.
Do not store the device in hot areas. High temperatures
●
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device
●
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
Do not attempt to open the device other than as
●
instructed in this guide.
58
Do not drop, knock, or shake the device. Rough
●
handling can break internal circuit boards and fine
mechanics.
Hard drives are fragile components that must be
handled with care. All impacts caused by shock,
vibration, bumping, and dropping; other mishandling
of the device; extreme temperatures; humidity and
liquids may cause the hard drive to malfunction and
data to be lost or corrupted.
Do not use harsh chemicals, cleaning solvents, or
●
strong detergents to clean the device.
Do not paint the device. Paint can clog the moving parts
●
and prevent proper operation.
Use a soft, clean, dry cloth to clean any lenses, such as
●
camera, and proximity sensor lenses.
Use only the supplied or an approved replacement
●
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
Use chargers indoors.
●
Always create a backup of data you want to keep, such
●
as contacts and calendar notes.
© 2008 Nokia. All rights reserved.