Table of Contents
Advertisement
1
— Capture mode indicator
2
— Active toolbar (not displayed during image capture).
See "Active toolbar", p. 26.
3
— Battery charge level indicator
4
— Image resolution indicator
5
— Image counter (the estimated number of images you
can capture using the current image quality setting and
memory)
6
— The device memory ( ), mass memory
memory card ( ) indicators, which show where images
are saved
7
— GPS signal indicator.
p. 27.
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after capturing an
image or recording a video. Scroll to items, and select
them by pressing the scroll key. You can also define when
the active toolbar is visible on the display.
The settings in the active toolbar return to the default
settings after you close the camera.
To view the active toolbar before and after capturing an
image or recording a video, select
icons. To view the active toolbar only when you need it,
26
, and
See "Location
information",
Options
Show
>
select
Options
Hide
>
toolbar when it is hidden, press the scroll key. The toolbar
is visible for 5 seconds.
In the active toolbar, select from the following:
to switch between the video mode and the image
mode
to select the scene
to switch the video light on or off (video mode only)
to select the flash mode (images only)
to activate the self-timer (images only).
to activate the sequence mode (images only).
to select a colour effect
to show or hide the viewfinder grid (images only)
to adjust white balance
to adjust the exposure compensation (images only)
to adjust sharpness (images only)
to adjust contrast (images only)
to adjust light sensitivity (images only)
The icons change to reflect the current setting.
Saving the captured image may take longer if you change
the zoom, lighting, or colour settings.
The active toolbar in Photos has different options.
"Active toolbar", p. 31.
icons. To activate the active
© 2008 Nokia. All rights reserved.
See
Advertisement
Table of Contents
