Table of Contents
Advertisement
The device creates a voice tag for the entries in Contacts and
for the functions designated in the Voice commands
application. When a voice command is spoken, the device
compares the spoken words to the voice tag in the device.
Voice commands are not dependent on a speaker's voice;
however, the voice recognition in the device adapts to the
main user's voice to recognise voice commands better.
Make a call
A voice tag for a contact is the name or nickname that is saved
on the contact in Contacts.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialing in all circumstances.
To listen to a voice tag, open a contact, and select
Play voice
tag.
1. To make a call using a voice command, press and hold the
voice key.
2. When you hear the tone or see the visual display, clearly
speak the name saved on the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language, and
displays the name and number. After a timeout of 1.5
seconds, the device dials the number. If the recognised
contact was not correct, select
matches or
Quit
to cancel dialling.
If several numbers are saved under the contact, the device
selects the default number, if it has been set. Otherwise,
© 2007 Nokia. All rights reserved.
Options
Next
to view a list of other
the device selects the first available number of the
following fields: Mobile,
(business), Telephone,
(business).
Launch an application
The device creates voice tags for the applications listed in the
Voice commands application.
To launch an application using a voice command, press and
hold the voice key, and clearly speak the name of the
application. If the recognised application was not correct,
select
Next
to view a list of other matches or
To add more applications to the list, select
application.
To change the voice command of an application, select
>
Options
Change
>
command.
Change profiles
The device creates a voice tag for each profile. To set on a
profile using a voice command, press and hold the voice key,
and say the name of the profile.
To change the voice command, select
Change
command.
Mobile
(home),
Tel.
(home), and
Options
command, and enter the new
Profiles
Mobile
Tel.
Quit
to cancel.
New
>
Options
>
>
39
Advertisement
Table of Contents
